Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Follow Rest
-
28th July 2013, 08:31 PM #1
Follow Rest
I have a heavy follow rest that I have no need of. It has a spacing between holes of 340mm and centre height from base is 170mm. One of the adjustment knobs is missing or broken off. Just the shaft there. Should be able fit a new knob fairly easily.
I have cleared the caravan out of this bay of my implement shed finally and started to rust protect my new lathe bits again. They were sitting on the box that holds my new table saw, not unpacked since november. Now the bay is clear I hope to get the saw into the shed and start cleaning the shed up to make room to move the old lathe and lay slab for new lathe.
Anyway I decided to ask about this follow rest after I had moved the stuff around so I did not look closely at it. It was dark and the lighting not ideal. If anyone is interested I can provide pictures and more details. I am not concerned about making money but do not want to just throw it out if it can be used.
Dean
-
28th July 2013 08:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
29th July 2013, 12:34 AM #2
Hi Dean,
I'd be interested in some pics, the Leblond came with a fixed steady but not a traveling.
Cheers,
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
30th July 2013, 12:38 PM #3Senior Member
- Join Date
- Oct 2011
- Location
- Newstead Victoria
- Posts
- 459
Plus one on that too Dean if not suitable for Ewan. John.
-
30th July 2013, 09:18 PM #4
No problems. Hopefully I will remember to do it tomorrow night. Would prefer it goes to a good home.
Dean
-
31st July 2013, 08:35 PM #5
Pictures as promised. The broken knob is plastic and pinned to the shaft. I cleaned up one of the adjustment shafts. Just a wipe with a rag. A picture of the bottom to give an idea on fitting it to another lathe. I will remove the bugs, webs, wasps nests etc.
Follow Rest Main.jpgFollow Rest Base.jpg
Dean
-
3rd August 2013, 01:55 AM #6
Sorry for the delay gents,
A bit small for Blondie, its all yours John.
Cheers,
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
Similar Threads
-
Pay Day Follow Up
By timberbits in forum WOODTURNING - PEN TURNINGReplies: 4Last Post: 5th October 2012, 03:29 PM -
I need The right Track to Follow
By AUSSIE in forum METALWORK FORUMReplies: 14Last Post: 20th September 2009, 09:18 PM -
Big bore follow up
By TTIT in forum WOODTURNING - GENERALReplies: 8Last Post: 20th December 2008, 05:54 PM -
Plywood - follow up
By garfield in forum WOODWORK - GENERALReplies: 11Last Post: 14th March 2008, 11:57 PM -
Follow that Curve!
By jacko in forum WOODWORK PICSReplies: 16Last Post: 19th July 2005, 11:25 PM