Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
20th September 2012, 12:18 PM #1.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Friedrich Deckel FP Fräsmaschine Baujahr: 1922 Rarität
There is a Deckel of similar vintage at the Deutsches Museum in Munich but it is located in a darkened room, supposedly evocative of the dimly lit workshops that existed in the early part of the twentieth century. Not conducive to nice photos.
This machine is currently being actioned on German Ebay - Friedrich Deckel FP Fräsmaschine Baujahr: 1922 Rarität - sehr selten | eBay
The seller's exhaustive photos are great, I dare say they will appear on Tony's site before too long.
BT
-
20th September 2012 12:18 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th September 2012, 03:58 PM #2GOLD MEMBER
- Join Date
- Mar 2011
- Location
- Dural NSW
- Age
- 82
- Posts
- 1,120
Bob
The simplicity, style, & design of these machines is just marvellous.
I like the photo of the metal punch machining operation.
It woul be nice to turn back time to this era.
regards
Bruce
-
20th September 2012, 05:00 PM #3
I agree that those are very nice photos and reveal the family genetics quite nicely. Bruce, I have an FP-1 made in 1948, there was a generation between them, but it was a leap away from the 1922 version and much more like mine. I think my version was first built in 1938.
It's all part of the service here at The House of Pain™
-
20th September 2012, 06:26 PM #4Senior Member
- Join Date
- Jun 2012
- Location
- Germany, Outback of Munich
- Posts
- 213
Now that FP is slowly making it around the world.
I hope he gets reasonable money for here.
Only question: Why didn't *I* find here? I would have made some model casting patterns before selling here and getting rich.
Nick
-
20th September 2012, 10:54 PM #5GOLD MEMBER
- Join Date
- Mar 2011
- Location
- Dural NSW
- Age
- 82
- Posts
- 1,120
-
21st September 2012, 10:26 AM #6.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Maybe Three Exist Nick?
Ah ha, I see now that I dragged my feet on this one - Deckel FP from 20'es found....
Here are the poor photos of the Deutsches Museum's FP along with one of the FP1* they have on display.
I don't know what's sitting on the FP's table, maybe some French tourist's camembert.
BT
* for Bruce so he can get misty eyed again.
-
21st September 2012, 11:25 AM #7GOLD MEMBER
- Join Date
- Mar 2011
- Location
- Dural NSW
- Age
- 82
- Posts
- 1,120
-
21st September 2012, 01:57 PM #8SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Ballarat
- Age
- 65
- Posts
- 2,659
-
22nd September 2012, 02:06 AM #9
I agree Phil ( and thanks, by the way, for your information on the glass supplier if I didn't already say that). I own two anti-friction bearing* machines and two oiled bushing machines. I use Mike G's 1913 Rivett 608 from time to time and am delighted every time that I do.
*anti-friction was the marketing name for rolling element bearings when they first came out. No word was mentioned of their wear, rumbling, brinelling and other failure modes. A bronze bushing, properly oiled seems to have next to no wear, and no $1000 + invoice for new bearings at overhaul time.
I have replaced a couple of bushings with sealed bearings, but only where access is limited and expected lifetime use to be relatively limited.
The generation of Deckel FP1 after mine had needle roller bearings custom fit to the fixed races in the housing and spindle. Repair assumed that the technician had access to an endless supply of rollers in 2 micron size increments. The bronze bush on the other hand just calls for grinding 0.0005" off the adjustment washer if the clearance needed tightening.
Morlina 10 spindle oil only costs a little more than bottled water from 7-Eleven, and refreshes for longer.
GregIt's all part of the service here at The House of Pain™
Similar Threads
-
I shrunk my Deckel FP1 ...
By MuellerNick in forum METALWORK FORUMReplies: 16Last Post: 13th September 2012, 01:41 PM -
Beer on tap at Friedrich Deckel??
By Anorak Bob in forum METALWORK FORUMReplies: 13Last Post: 9th January 2012, 05:13 PM -
Where's the Deckel mill?
By neksmerj in forum METALWORK FORUMReplies: 50Last Post: 19th May 2011, 12:32 AM -
Greg's Deckel????
By neksmerj in forum METALWORK FORUMReplies: 1Last Post: 9th March 2011, 09:31 PM -
1922 Launceston Pilots Mullet boat, Tasmania
By SimonP in forum CLASSIC BOAT RESCUE & ADOPTIONReplies: 1Last Post: 7th March 2011, 04:59 PM