Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Front end treatment.
-
15th September 2020, 10:00 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,431
Front end treatment.
These are some wheel spacers and dust covers I made. Spacers are stainless with ally dust covers pressed in place. The speedo drive is replaced with a stainless spacer with ally dust cover, going to use an electronic speedo instead, if I can find one.
I also removed the caliper mount on the left slider and the lower mudguard mounts, grond them down smooth and polished them.
Hub was chucked, flanges evened up and casting bridges straightened.
The disk was given some lightning holes and the edge polished, the disk mount bead blasted and stainless fasteners polished and fitted along with sealed bearings.
Rim was polished, just have to buy some stainless spokes, polish them and spoke it up.
Attached Images
- WIN_20200915_15_46_57_Pro.jpg (179.6 KB)
- WIN_20200915_15_55_14_Pro.jpg (131.0 KB)
- hub2.jpg (176.4 KB)
- WIN_20200828_14_42_08_Pro (2).jpg (195.5 KB)
- WIN_20200828_14_42_41_Pro (2).jpg (180.5 KB)
- 35.jpg (126.0 KB)
- sliders2.jpg (192.5 KB)
- WIN_20200915_15_55_28_Pro.jpg (130.6 KB)
Read the full thread at metalworkforums.com...
-
15th September 2020 10:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
N.S.W. 3 x shoulder vice, regular front vice, large front vice & handles
By nickwithaz in forum WOODWORK - Tools & MachineryReplies: 21Last Post: 18th July 2020, 01:46 PM -
Drawers: Why use a false front? I want a real front!
By mugget in forum WOODWORK - GENERALReplies: 19Last Post: 14th August 2015, 10:58 PM -
The silent treatment
By Onezero in forum THE SHEDReplies: 28Last Post: 6th June 2012, 08:15 AM -
Termite Treatment
By 3RU in forum SAFETYReplies: 9Last Post: 15th December 2011, 04:51 PM -
Eco Wood Treatment Or Lifetime Wood Treatment Use
By SRudd in forum WOODWORK - GENERALReplies: 3Last Post: 16th September 2011, 10:52 AM