Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Gear cutters anyone?
-
30th April 2013, 08:47 PM #1Philomath in training
- Join Date
- Oct 2011
- Location
- Adelaide
- Age
- 59
- Posts
- 3,149
Gear cutters anyone?
I went into Machinery Warehouse in Wingfield today and saw they had some gear cutters up for sale. As Chains and Accessories have been sold (sales to Royce Cross, power transmission to Hercus) I'm guessing they may have come out of the C&A workshop as there are multiples and in those multi-part cardboard boxes (looks like tool store storage to me).
The range is from around 3DP upwards to around 20DP (although there are some smaller) and seem to be in the smaller tooth end of the range (that is, the no's 4s through to 8's - there are some lower numbers but not as easy to find)
I bought a few 14DP, a 20DP and a 32DP. If anyone is looking for cutters it may be worth a look. Pricing is hard to say as I'm known and get regular's discount but if you wanted multiples I'd be budgeting around $30 per cutter.
For those interstate with a 5DP 100t gear to cut - I may be able to head that way later in the week...
Michael
Further info - these cutters are 14 1/2 degree pressure angle BTWLast edited by Michael G; 1st May 2013 at 07:56 AM. Reason: Further information
-
30th April 2013 08:47 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
30th April 2013, 08:56 PM #2SENIOR MEMBER
- Join Date
- Jun 2011
- Location
- Australia east coast
- Age
- 71
- Posts
- 1,469
Hmmm - have to see which ones I'm missing in 12DP, 14DP & 16DP which are my most common sizes.
I have a couple spare rack cutters to trade if I can find them and anyone is interested. 10DP and 9DP I think....
PDW
Similar Threads
-
Steering gear cutters?
By Ash240 in forum METALWORK FORUMReplies: 6Last Post: 24th May 2012, 09:53 AM -
Crazy cheap Welders,Plasma cutters and welding gear in Perth
By wsdave in forum ANNOUNCEMENTSReplies: 0Last Post: 2nd March 2012, 12:51 AM -
Holding gear cutters?
By nadroj in forum METALWORK FORUMReplies: 4Last Post: 5th June 2011, 11:25 PM -
Gear tooth count on Back/Bull Gear.
By pipeclay in forum THE HERCUS AREAReplies: 31Last Post: 6th January 2010, 11:56 AM -
Metal gear / worm gear needed
By colinshannon in forum METALWORK FORUMReplies: 14Last Post: 29th March 2007, 10:49 PM