Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Gear hobber and Taper gauge -
-
23rd November 2014, 10:37 PM #1SENIOR MEMBER
- Join Date
- Nov 2010
- Location
- Gippsland Victoria
- Posts
- 706
Gear hobber and Taper gauge -
These may be of interest to other people. See the links on page below. I thought the gear hobber and taper gauge were interesting.
I found them whilst googling for clever ways to cut a morse taper with my short compound slide.
I set up the angle by dialing onto a taper mounted between the headstock and the tailstock - this chap uses a sort of sine bar approach to setting up the angle.
I dont understand his gear hobbing machine but other people will.
https://sites.google.com/site/pjoptical/home
Bill
-
23rd November 2014 10:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Qualos 00 gear hobber
By snapatap in forum METALWORK FORUMReplies: 7Last Post: 12th June 2014, 09:51 PM -
Taper Pins and taper pin reamers
By tbonesmith in forum METALWORK FORUMReplies: 4Last Post: 14th April 2014, 02:49 AM -
Make a top slide short taper gauge
By Retromilling in forum THE HERCUS AREAReplies: 2Last Post: 8th October 2008, 09:42 AM -
Make a top slide short taper gauge.
By Retromilling in forum METALWORK FORUMReplies: 0Last Post: 7th October 2008, 09:47 AM