Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Gear train help
-
18th January 2021, 04:30 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Gear train help
Hi, is there a service provided that can help me with gear train calculations. Due to extremely high cost I intend on changing my coil winding machine over to metric off the shelf gears. As I don't have the 18 change gears supplied from new which are imperial I was hoping for a setup as the lathe gearing uses to convert thread cutting to metric on old lathes giving me a train that is the same as the gear legend on the machine. Thankyou.
Read the full thread at metalworkforums.com...
-
18th January 2021 04:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Model Train gear
By nine fingers in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 3Last Post: 22nd December 2013, 02:50 PM -
Myford Gear train
By wheelinround in forum METALWORK FORUMReplies: 10Last Post: 30th April 2013, 06:27 PM -
Gear train to cut imperial threads on metric lathe (AL 340)
By 19brendan81 in forum METALWORK FORUMReplies: 11Last Post: 17th January 2012, 03:15 PM -
Gear tooth count on Back/Bull Gear.
By pipeclay in forum THE HERCUS AREAReplies: 31Last Post: 6th January 2010, 11:56 AM -
Metal gear / worm gear needed
By colinshannon in forum METALWORK FORUMReplies: 14Last Post: 29th March 2007, 10:49 PM