Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: glass drilling
-
5th November 2012, 09:05 PM #1
glass drilling
Hi
I was wandering around ALDI , I spotted the glass drilling bit kit , 5 bits . From 3mm to 8 mm size bits , carbide tipped .
Just wondering what would be the best speeds for these bits ? I am somewhat intrigued by the thought of drilling holes in glass MIKE
-
5th November 2012 09:05 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th November 2012, 09:20 PM #2
How to Drill Holes Through Glass: 8 steps (with pictures)
I've used a grinding head to get thru glass and just used water as a lube.
-
6th November 2012, 08:40 PM #3SENIOR MEMBER
- Join Date
- Jan 2004
- Location
- Bellingen
- Posts
- 587
I have used turps as a coolant/lube for drilling glass vases for lights. You can make a little dam around hole wilh bluetac or clay etc to hold the coolant in place.
Similar Threads
-
Techniques with glass/glass work etc.
By Ziapurple in forum Links to: INSPIRATIONAL WEB SITESReplies: 1Last Post: 30th March 2012, 04:25 AM -
glass top coffee table using pool glass fencing panel instead?
By brucey in forum WOODWORK PICSReplies: 0Last Post: 7th March 2012, 11:34 PM -
Attn MIK and PAR: Lightweight 'glass vs. heavier glass
By Rick_Tatum in forum BOAT BUILDING / REPAIRINGReplies: 17Last Post: 1st July 2009, 11:52 PM -
Drilling Glass
By `Felix` in forum WOODWORK - GENERALReplies: 1Last Post: 12th March 2004, 02:48 PM