Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
19th August 2014, 11:34 AM #1.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Grinder Workhead Rotation Direction?
If I'm looking at the T and C grinder from the right hand end, the grinding wheel rotates counterclockwise. I never observed the workhead motor operating before I brought it home from Peter Fou's and I have subsequently dismantled and reassembled the motor. My assumption ( ? ) is that the motor would rotate in a clockwise direction. Seems straightforward BUT I recall a discussion a while back about my Dumore tool post grinder and the trouble I was having achieving an acceptable finish. A suggestion was made to reverse the lathe spindle rotation.
So my question is "when cylindrical grinding, in what direction does the workpiece rotate? "
BT
-
19th August 2014 11:34 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
19th August 2014, 11:55 AM #2Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
Same direction as the wheel head direction... If you look from the left hand side of the machine, the wheel head will spin clockwise, the workhead will also spin clockwise...
Light red, the colour of choice for the discerning man.
-
19th August 2014, 12:18 PM #3Intermediate Member
- Join Date
- Jun 2012
- Location
- ex Perth, now Mittagong
- Posts
- 41
Bob,
.RC. is correct with the rotation. Before you did the motor this is the way it rotated. Normally the work head is on the left hand side of the table if you are spinning the work-head and if you have a the chuck screwed on to the spindle the rotation of the spindle ensures that the chuck won't unscrew. Similarly, if you do a bit of cylindrical grinding between centres the direction is is as per a full blown cylindrical grinder, i.e. workpiece rotating upwards meeting the grinding wheel rotating downwards.
Peter
-
19th August 2014, 02:13 PM #4.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Thank you Richard and Peter.
Bob.
Similar Threads
-
T and C Grinder Workhead - Drive Motor Replacement.
By Anorak Bob in forum METALWORK FORUMReplies: 11Last Post: 18th June 2014, 07:46 AM -
Direction of rotation
By Alastair in forum GENERAL & SMALL MACHINERYReplies: 34Last Post: 16th April 2009, 07:24 AM -
How to change rotation direction of elec motor
By Wattie in forum WOODWORK - GENERALReplies: 13Last Post: 21st April 2007, 12:10 AM -
Why can you reverse the direction of rotation of metal lathes?
By Billy Bignutz in forum METALWORK FORUMReplies: 25Last Post: 25th November 2006, 09:05 AM