How hard do I hit that?

**Stustoys** · 17th December 2013, 08:43 PM

I've used
Loctite Freeze Release Spray 400ml | eBay

With great success on an MT3 pillar drill spindle.(on a sample on one)

There was a post about using ball bearings to fill up the drawbar hole in the arbor before using a morse taper drift, I remember trying it and taking some pictures but I cant recall the result. I'll have more of a search but my pc isn't playing nice ATM.

Stuart

**tanii51** · 17th December 2013, 09:04 PM

i reckon its time to use the mt drift drive it in and if that doesnt shift it maybe put a rod down from the top so that it rests on the drift and try giving it a crack from the top
it might come out pretty quick so put a bit of wood or something on the table top
john

**Old Hutcho** · 20th December 2013, 10:31 AM

Well its out!

I got really frustrated with it and got the 14 lb sledge and .......No I didnt. I was frustrated, but in desperation I sprayed a heap of Lanotec down around the top of the taper and this morning I went out and in my desperation and frustration gave it a gentle tap with a steel hammer and lo and behold, it came away in my hand. I'm just so bloody happy now.

regards to all and Merry Christmas.

Old Hutcho

Thread: How hard do I hit that?

Thread Tools

Search Thread

Its out!

Similar Threads

WOP gone hard

How hard is hard enough for a hardwood floor?

How hard can it be...

Hard to Tell.....

Hard Hard Wood

Tags for this Thread

Posting Permissions