Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 19
  1. #1
    Join Date
    Nov 2008
    Location
    Perth WA
    Age
    71
    Posts
    5,650

    Default Helix Clamps - A modification

    I bought a pair of these clamps on German Ebay and after a 6 week wait they finally arrived. They suit 14mm wide tee slots. My mill has 12mm slots. The original M12 bolt is radiused on the underside of the head to match an internally radiused washer to facilitate pivoting. Not having a ball turner, I resorted to using a lathe file. The tee nut and washers are 4140. The M10 cap screws do not have long enough threads, something I will deal with tomorrow. Should be fun, it was forecast to be 42.

    BT

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2010
    Location
    Melbourne
    Posts
    7,775

    Default

    Hi BT,
    Looks good.
    I made a couple of form tools to make pretty much the same thing for fixing the misalignment of the change gears on my lathe. I have them sitting in a draw, looks like I might get to use them again!.

    Stuart

  4. #3
    Join Date
    May 2010
    Location
    Lower Lakes SA
    Age
    58
    Posts
    2,557

    Default

    Nice work Bob. Did you harden them? They look cooked.

    Those staircase clamps are so cool. I don't really need them but I want to make some anyway.

  5. #4
    Join Date
    Nov 2008
    Location
    Perth WA
    Age
    71
    Posts
    5,650

    Default

    Stu and Bryan,

    Thank you.

    They are not hardened. I chose to colour them up with my Mapp Gas torch and sump oil rather than fool around with the Blackfast kit.

    BT

  6. #5
    Join Date
    Jul 2010
    Location
    Melbourne
    Posts
    7,775

    Default

    Hi BT,
    Did you try a file on it?
    After all you did heat it up red hot and drop it in oil. sure to wont be as good as it could be as you likely missed a few steps, but it might still be harder that it was.

    Stuart

  7. #6
    Join Date
    May 2010
    Location
    Lower Lakes SA
    Age
    58
    Posts
    2,557

    Default

    Bob could I trouble you for a couple more pics please? I'd like the see the rear view of the whole assembly, and also the other components separately - the ones not already shown on their own. I've got to thinking about how I could machine them from solid but I don't have the full mental picture. Thanks. No rush.

  8. #7
    Join Date
    Nov 2008
    Location
    Perth WA
    Age
    71
    Posts
    5,650

    Default

    Quote Originally Posted by Stustoys View Post
    Hi BT,
    Did you try a file on it?
    After all you did heat it up red hot and drop it in oil. sure to wont be as good as it could be as you likely missed a few steps, but it might still be harder that it was.

    Stuart
    No where near red Stu. I dropped it in the oil when the colour was blue - purple. The two components aren't doing enough to warrant heat treatment. ( Not that I know anything about it.)

    Bryan,

    I will post more photos tomorrow.

    BT

  9. #8
    Join Date
    Jul 2010
    Location
    Melbourne
    Posts
    7,775

    Default

    Quote Originally Posted by Anorak Bob View Post
    No where near red Stu. I dropped it in the oil when the colour was blue - purple.
    Thats what I do as well as thats as hot as the stove will get them lol, get some nice colors and it seems to last pretty well.

    Stuart

  10. #9
    Join Date
    Mar 2011
    Location
    Dural NSW
    Age
    82
    Posts
    1,120

    Default Colouring by heating

    Quote Originally Posted by Anorak Bob View Post
    No where near red Stu. I dropped it in the oil when the colour was blue - purple. The two components aren't doing enough to warrant heat treatment. ( Not that I know anything about it.)

    Bryan,

    I will post more photos tomorrow.

    BT
    Bob
    Pleased to hear that the parts were not heated to red & then quenched as that could harden them & make them glass hard, brittle, & dangerous to use
    The blue purple temp is around 280 C to 300 C
    This is OK I believe.
    Parts look great !
    regards
    Bruce

  11. #10
    Join Date
    Jul 2003
    Location
    The Fabulous Gold-plated Coast.
    Age
    69
    Posts
    3,925

    Default

    Have you had a chance to use the clamps in anger, Bob? I bought a box of them for cheap a year ago and had them carried back by a friend. They make me want to buy more AMF things.

    Greg
    It's all part of the service here at The House of Pain™

  12. #11
    Join Date
    Nov 2008
    Location
    Perth WA
    Age
    71
    Posts
    5,650

    Default Intimate pictures for Bryan

    I hope this is sufficient.

  13. #12
    Dave J Guest

    Default

    Really nice looking clamps Bob, And thanks for the additional pictures.
    I was looking at the 2 last pictures in the first post and it seems the way they are set up breaks the main clamping rule of having the stud closer to the work than step block. It looks like it can go even further forward making it like 2/3rds away from the work and 1/3 away from the clamp which wouldn't give a lot of pressure on the job.
    I hope thats understandable as it would be easier to draw, LOL.

    Dave

  14. #13
    Join Date
    Nov 2008
    Location
    Perth WA
    Age
    71
    Posts
    5,650

    Default

    Quote Originally Posted by Greg Q View Post
    Have you had a chance to use the clamps in anger, Bob? I bought a box of them for cheap a year ago and had them carried back by a friend. They make me want to buy more AMF things.

    Greg
    ( I had to have a lay down after eating your lunch as well as mine. )

    I haven't used them yet in earnest. This morning, I modified both the screws and the nuts to enable them to clamp at their lowest position which is 30mm above the table. They have an (expected) substantiality about them and the clamping feels more secure than anything I've used before. I will look for more.

    I remember when you mentioned scoring the box full. At the time, I had only recently seen a Deckel brochure and my appetite was definitely whet. It was your encouragement to scour Ebay Deutschland that resulted in my purchase of these bargain clamps.

    BT

  15. #14
    Join Date
    May 2010
    Location
    Lower Lakes SA
    Age
    58
    Posts
    2,557

    Default

    Thanks for the pics Bob. I feel I'm on first name terms with your clamps now.

    Dave I think there is room to move the workpiece a bit closer to the stud. And closer still with a flat strap.

  16. #15
    Join Date
    Nov 2008
    Location
    Perth WA
    Age
    71
    Posts
    5,650

    Default

    Quote Originally Posted by Dave J View Post
    Really nice looking clamps Bob, And thanks for the additional pictures.
    I was looking at the 2 last pictures in the first post and it seems the way they are set up breaks the main clamping rule of having the stud closer to the work than step block. It looks like it can go even further forward making it like 2/3rds away from the work and 1/3 away from the clamp which wouldn't give a lot of pressure on the job.
    I hope thats understandable as it would be easier to draw, LOL.

    Dave
    Dave,

    They are only pretend set ups showing the clamping range. I would use them with the pull down bolt as close as possible to the clamp strap nose. The long slot in the clamp strap facilitates it's reversal.

    BT

Page 1 of 2 12 LastLast

Similar Threads

  1. Pulley Modification
    By Anorak Bob in forum METALWORK FORUM
    Replies: 14
    Last Post: 29th January 2011, 07:29 PM
  2. Aldi modification?
    By Ross in forum DUST EXTRACTION
    Replies: 14
    Last Post: 5th June 2009, 02:14 PM
  3. Bed modification Q
    By petersemple in forum WOODWORK - GENERAL
    Replies: 9
    Last Post: 8th February 2008, 01:15 PM
  4. Sash clamps versus Bessey K series clamps
    By zelk in forum HINTS & TIPS
    Replies: 8
    Last Post: 6th September 2007, 10:24 PM
  5. which brand g-clamps and sash clamps??
    By TimberNut in forum HAND TOOLS - UNPOWERED
    Replies: 2
    Last Post: 20th September 2005, 05:44 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •