Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Can anybody help
-
18th May 2010, 09:34 AM #1
Intermediate Member
- Join Date
- Sep 1999
- Location
- Tingalpa Q.L.D.
- Age
- 73
- Posts
- 49
Can anybody help
Hi all,
I live in Keilor V.I.C. and I am looking for somebody close by with a metal lathe who I can pay to machine a tool post for a wood lathe down from 30mm to 1inch, the bit that needs to be machined is about 65mm long, the tool post length is about 100mm with a stepped down section about 34mm long and 19mm dia, I hope this makes sense.
Barry
-
18th May 2010 09:34 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
18th May 2010, 09:42 AM #2
Retired Member
- Join Date
- Nov 2006
- Location
- Bendigo Victoria
- Age
- 80
- Posts
- 16,560
Not exactly "close" to Keilor, but do drive past there every time I go to Melbourne.
If you can't find someone local to do the job for you I can do it for you, but you would need to post it to me.
-
18th May 2010, 03:43 PM #3
Senior Member
- Join Date
- Mar 2009
- Location
- Melbourne
- Age
- 54
- Posts
- 380
G'day Bazza,
I live in Fawkner and can help you out if you still need it. Send me a PM.
Cheers,
Greg.
-
19th May 2010, 09:06 AM #4
Intermediate Member
- Join Date
- Sep 1999
- Location
- Tingalpa Q.L.D.
- Age
- 73
- Posts
- 49
Thanks to both of you for your help, but Fred Greg is a bit closer.
Greg P.M. sent.
Thanks Barry
