Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
13th April 2020, 11:30 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Help to identify old tapping head
Gday Everyone.
Ive got an old tapping head (chuck) that I have been repairing. Its had a hard life before I got it. So much so that the makers logo/name is almost gone.
Can anyone here identify it?
Can just make out the outline of the makers logo but cant read the writing inside.
taphead logo.jpg
Any ideas?
thanks
Peter
Attached Images
- taphead logo.jpg (171.4 KB)
Read the full thread at metalworkforums.com...
-
13th April 2020 11:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Anyone have a Crown tapping head?
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 17th February 2020, 08:50 PM -
VICTORIA Dewalt DW735 Planer with spiral head and Jet 6inch jointer with bryd Cutter head
By hhpcheah in forum WOODWORK - Tools & MachineryReplies: 7Last Post: 11th January 2020, 10:23 PM -
Tapping head advice request
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 22nd November 2018, 06:50 PM -
thread tapping head
By tanii51 in forum METALWORK FORUMReplies: 4Last Post: 15th August 2010, 06:58 PM -
source for steel round head and flat head slot screws?
By womble in forum FINISHINGReplies: 6Last Post: 1st July 2007, 11:31 PM