Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: help with MARS tailstock
-
2nd September 2019, 01:20 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
help with MARS tailstock
Hi All,
I will get some photos soon but while i remember.
I need some help with some heavy handed work by myself.
My tail stock was rusted together and was a real pain to get apart.
I ended up having to belt the spindle part out from the back with a punch
unfortunately i have mushroomed in the end where the screw would go back in.
The screw will no longer fit.
The thread inside looks a little damaged but still there.
What now
Do i drill the end to make the hole the size i need to insert screw
do i get the end faced
do i send it away to get professional help
Do i get a different tail stock and make it work
Read the full thread at metalworkforums.com...
-
2nd September 2019 01:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
How to get to Mars
By Bushmiller in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 1Last Post: 24th January 2013, 12:28 PM -
Mars bar no, Mars lathe!
By neksmerj in forum METALWORK FORUMReplies: 20Last Post: 29th September 2012, 08:18 PM -
What do you think? To Mars - and beyond
By Phil Spencer in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 21Last Post: 3rd November 2010, 01:16 PM -
Men are from Mars ...
By Grunt in forum WOODIES JOKESReplies: 29Last Post: 20th May 2006, 06:53 PM -
Mars
By ozwinner in forum WOODIES JOKESReplies: 0Last Post: 29th August 2003, 07:06 PM