Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 33 of 33
-
8th February 2012, 04:06 PM #31Dave J Guest
No problem Bob, I have always planned to have mine lever operated instead of the detent.
Here are a couple of others that I have found over the years
Projects In Metal, LLC » Blog Archive » New Project: Plans for a Lathe Tailstock Turret:
Tailstock turret - mikesworkshop
This one is a good right up and shows the lever lock.
Tailstock Turret
Dave
-
8th February 2012 04:06 PM # ADSGoogle Adsense Advertisement
-
16th March 2012, 10:52 PM #32
Novice
- Join Date
- Aug 2008
- Location
- queensland australia
- Posts
- 11
turrent attachement
i bought a Turret attachment for my Hercus 260 approx 12 months ago, however when placing it on the machine the holes in the " rotating head " don't line up with the axis of the lathe , ( they are below centre ) just wondered how other people got on when they fitted theres as they come seperate to the machine when purchased
-
16th March 2012, 11:53 PM #33
.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
SFH,
My 9" turret was higher than the spindle axis. I removed some of the base of the turret to lower it. You may be able to pack yours up with a shim.
I had other alignment issues - https://www.woodworkforums.com/f65/tu...oubles-137714/
Bob.
Similar Threads
-
Hercus Turret Stuff & Depth Stops
By Abratool in forum METALWORK FORUMReplies: 12Last Post: 14th July 2011, 12:03 PM -
Hercus 9" turret attachment
By Garry Edwards in forum THE HERCUS AREAReplies: 5Last Post: 8th September 2010, 02:31 PM
