Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: HM-48 Mill Oil points?
-
15th February 2020, 04:40 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,433
HM-48 Mill Oil points?
Not wanting to use the mill recently without oil on all surfaces which require it, I used my ML& Nito32 as the oil plunger was full and only one I have atm.
Before I get into more work I need to acquire a second oil pump type unit, locate ALL the nipples seems I need to modify the DRO on the X axis to be able to gain access without the need to constantly remove it a note to H&F
I have read the manual not one word of locations of these points however they are noted in the Parts list. Wish they supplied an oil pump unit with the machine trying to find a decent size one to suit all access points not going well.
Read the full thread at metalworkforums.com...
-
15th February 2020 04:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Best way to oil these points??
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 16th August 2019, 10:40 PM -
Best way to oil these points??
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 16th August 2019, 10:30 PM -
Rep points
By ozwinner in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 45Last Post: 7th March 2006, 07:59 AM -
Rep points are off.
By RETIRED in forum ANNOUNCEMENTSReplies: 34Last Post: 8th June 2004, 11:55 PM -
Rep points.
By RETIRED in forum ANNOUNCEMENTSReplies: 3Last Post: 8th June 2004, 10:49 PM