Thanks: 
Likes: 
Needs Pictures: 
Picture(s) thanks:
Results 46 to 51 of 51
Thread: honden lathe
-
18th April 2013, 11:42 AM #46
Senior Member
- Join Date
- Apr 2010
- Location
- ringwood vic
- Posts
- 251
G'Day Bollie,
Tailstock ram is 40 mm dia,
Regards,
Martin
-
18th April 2013 11:42 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th April 2013, 11:59 AM #47
SENIOR MEMBER
- Join Date
- Aug 2008
- Location
- Charlestown NSW
- Age
- 65
- Posts
- 899
Thanks mate. I'll try and remember to check mine tonight. I might be able to bore it out. That would be good.
Originally Posted by toolman49
bollie7
-
18th April 2013, 01:20 PM #48
future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
Dam guys now you have me thinking about a new project a 3 mt tail stock, hopefully my mc Milan has the same size barrel I think it does from memory haven't checked though
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
18th April 2013, 02:02 PM #49
Senior Member
- Join Date
- Apr 2010
- Location
- ringwood vic
- Posts
- 251
G'Day Fellas,
The spec sheet shows both the MT2 and MT3 tailstock having 40mm diameter, so maybe it is possible to bore/ream the MT2 out to MT3.
Regards,
Martinpage004.JPG
-
18th April 2013, 03:01 PM #50
SENIOR MEMBER
- Join Date
- Jun 2011
- Location
- Australia east coast
- Age
- 71
- Posts
- 1,469
I'd make a new one. Not all that difficult (I've done it) and you don't ruin anything if you fail the first time or 2. Originally Posted by toolman49
PDW
-
21st April 2013, 10:46 PM #51
SENIOR MEMBER
- Join Date
- Aug 2008
- Location
- Charlestown NSW
- Age
- 65
- Posts
- 899
Nothing ever goes easy does it? I measured the T/S ram on my 1981 McMillan yesterday. 32mm dia. Not 40 unfortunately. grrrrr
bollie7
Similar Threads
-
HEADS UP Wood lathe:jet 1220 midi lathe
By Woodwarehouse in forum ANNOUNCEMENTSReplies: 0Last Post: 1st December 2011, 03:02 PM -
Converting a Metalworking Lathe to Wood Turning Lathe
By GrinlingGibbons in forum WOODTURNING - GENERALReplies: 13Last Post: 29th March 2011, 07:17 AM -
Buying a lathe (Old massive Lathe, or New small C6 Lathe)
By Ch4iS in forum METALWORK FORUMReplies: 5Last Post: 25th March 2009, 12:19 PM -
Honden lathe sold
By lynaes in forum METALWORK FORUMReplies: 7Last Post: 15th February 2009, 06:51 PM -
Honden lathe
By lynaes in forum METALWORK FORUMReplies: 19Last Post: 8th January 2009, 10:17 AM
