Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
7th September 2011, 06:50 PM #1
I need these made...any interest?
Hi all, I am looking for some advice from the metalworking fraternity about threaded rod. I have a particular design I am after, roughly described below.
I need two partially threaded rolled carbon steel rods that are 3/4" diameter and 12" long. They need the thread to stop 2" from the end. The thread is to be an ACME 8 tpi. The plain end should have a 3/8" radius.
The last 2" of each rod needs to have three 3/8" holes drilled in it. From the end, the first is centred at 7/16", second 7/8" and the last at 1-5/16".
Finally, I also need two straight 5" x 3/4" bars with a 1" long by 3/8" round end on it.
Anyone who could make those? Or know anyone who could? Estimate of cost?
All advice appreciated, thanks in advance.
-
7th September 2011 06:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
7th September 2011, 08:30 PM #2GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 65
- Posts
- 3,566
Is the Acme thread right or left handed,what tollerance is there on the radious,the 3/8" diameter,the centre distance of the holes and overall length of the different diameters.
-
7th September 2011, 08:44 PM #3
-
9th September 2011, 11:38 AM #4SENIOR MEMBER
- Join Date
- Apr 2008
- Location
- Canberra
- Posts
- 816
Hey Groggy,
Has someone offered to help you out yet? What are these parts for?
Brendan
-
9th September 2011, 05:22 PM #5
The parts are to help me to modify a Moxon Vise for use on my bench in a variety of new positions. I am talking to Benchcrafted at the moment about it, they seem interested in the ideas and may be able to help me (bless'em ).
Similar Threads
-
Might interest some...
By RETIRED in forum WOODTURNING - GENERALReplies: 4Last Post: 23rd August 2010, 11:56 AM -
RBA raises interest rates! But we have SIX MONTHS INTEREST FREE.
By nt900 in forum IDEAL TOOLS - High end tools for all woodworkers.Replies: 0Last Post: 3rd March 2010, 06:08 PM -
Out of Interest
By Arry in forum TABLE SAWS & COMBINATIONSReplies: 3Last Post: 14th June 2009, 10:28 PM -
Some pens made from tired old flooring and another made of Cocobolo
By Matt88s in forum WOODTURNING - PEN TURNINGReplies: 11Last Post: 16th May 2007, 03:00 PM