Hey guys as per the other thread after i derailed it from air tools to compressors...

I am going to buy a couple cheap 40L 50L second hand air compressors both will be 2hp each i plan on joining the two to one output hose for 4hp 80L capacity byt wait... these little sucky sucky compressors suck with there 1/4" outlets so my plan is to drill and tap the inspection plug for a 1/2" fitting on both tanks for ultimate output in cubic feet per minute

Any thoughts or advice? I was going to go 2 brand new 50L vertical 2hp compressors but second hand are next to nothing

I have a 15amp outlet to use


Read the full thread at metalworkforums.com...