Lathe dividing head attachment

**jamie_c** · 31st July 2010, 06:29 PM

Hi, I am looking for a small dividing head that will work well on my Hercus 260 lathe, I have a vertical mill attachment and boring table slide already which have t-slots in them, so something that would easily bolt to either of those.

What do you guys recommend?

Thanks

Dave J · 31st July 2010, 07:29 PM

Hi Jamie,
Depending on the accuracy you need, you could get a small 100 or 150mm rotary table with a set of dividing plates, that way you have the best of both worlds, being able to mill on it and divide.
https://www.machineryhouse.com.au/Pr...stockCode=R005
https://www.machineryhouse.com.au/Pr...stockCode=R006
https://www.machineryhouse.com.au/Pr...stockCode=R016

They do have a small tilting one as well, but I don't think you can get diving plates for it.
https://www.machineryhouse.com.au/Pr...stockCode=R003

If you shop around and look on ebay, you can get them cheaper than the prices above.

Dave

**jamie_c** · 31st July 2010, 07:42 PM

Thanks Dave.

Thread: Lathe dividing head attachment

Thread Tools

Search Thread

Lathe dividing head attachment

Similar Threads

Rotary table Vs Dividing head

Milling attachment for lathe

Review: Sherwood SCA-900 Lathe Copy Attachment

CNC Lathe attachment

Tags for this Thread

Posting Permissions