Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
-
19th October 2013, 12:03 AM #1SENIOR MEMBER
- Join Date
- Aug 2011
- Location
- victoria
- Posts
- 524
any one know which lathe this is ? look similar to the Lorch
I'm restoring it now . almost done but waiting for the new spindle bearing .
all information's I have is made in 1941 stemped on the headstock . it use the taper 32206 bearing on the headstock . any one have spare one ?
Peter_DSC6840.jpg_DSC6841.jpg_DSC6842.jpg_DSC6843.jpg_DSC6844.jpg_DSC6845.jpg_DSC6846.jpg
-
19th October 2013 12:03 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th October 2013, 09:10 AM #2.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Interesting little lathe Peter with its offset topslide leadscrew and drive.
If no one here can identify it you could always email your photos to Tony Griffiths at lathes.co.uk and see if he recognises it.
Bob.
-
19th October 2013, 11:26 AM #3SENIOR MEMBER
- Join Date
- Aug 2011
- Location
- victoria
- Posts
- 524
Good Day Bob.
it is quite nice little lathe .i restore it purely for display piece and may be play around with some little tuning .
i'm pretty sure it made in germany as the bearing used in the headstock are all germany as well as the collets set .but funny it doesn't have any brand name printed anywhere . tails stock is super smooth as well as the cross/topslide . I love the feel of it .
yes please do pass it onto Tony see if he can identify it .
regards
Peter
-
20th October 2013, 08:00 AM #4Senior Member
- Join Date
- May 2012
- Location
- Melbourne, Victoria
- Posts
- 121
Dear Peter,
What a fantastic looking machine. I think that it is a Lorch. Compare your cross/topslide assembly with this page showing a much older lathe: Page Title
Just sit and compare your's to this one, there are some nice close-up pictures. They are very, very, similar.
1941 you say, is it just the number stamped in, is it possible that it is a serial number? My serial numbers are on my headstock, the bed, the tailstock, and somewhere on the cross slide assembly, for the watchmaker's Lorch that I have. From memory the number is in the 1 thousands.
Let's just say it is a 1941 build, WW2 was going for two years already. I think that the lack of a maker's badge would probably have something to do with it being a 'war-finish' type machine. Beautifying a machine would not be at the top of their priority list, getting them out the door would've been. The collets and bearings, are they marked "Germany", or "Deutschland"?
Peruse this website, it is in both German and English, you will find lots of manuals. I had a look through but couldn't find your exact one. There is some nice information about tolerances etc as well for similar machines, which would be very helpful in getting it running nicely. Catalogs collection Lorch tools, lathes by Steffen Pahlow©. Incidentally this fellow has a nice youtube video up showing his Lorch KD 50 lathe. Worth taking a look. Lorch KD 50 Lathe, Drehbank in Aktion - YouTube
Would you be willing to put up pictures of other parts you have? Even if they are unrestored. I'd be very interested in seeing them. Does it take the 10mm collets?
Kind regards,
Joe
-
20th October 2013, 10:44 AM #5
Hi Peter,
That is a beautiful looking lathe, you have done a great job on the resto.
Do you have the cabinet, countershaft etc? More photo's please!
The bearing is a standard wheel bearing size, you would be best trying to get them in P4, but they will not be cheap.
Cheers,
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
20th October 2013, 07:06 PM #6SENIOR MEMBER
- Join Date
- Aug 2011
- Location
- victoria
- Posts
- 524
Thanks Guys.
I did have most of everything's with the lathe . complete set of collets and dead center but optional parts is not .
will take some more pictures soon .
Ewan. I see good bearing on ebay for not much i think they all around under $20 for that 32206 but shipping will get it up there
Cheers
Peter
-
21st October 2013, 08:10 PM #7SENIOR MEMBER
- Join Date
- Aug 2011
- Location
- victoria
- Posts
- 524
Hi Joe.
here is some details pictures of all the bits . the collets set come in to two different sources . a few is marked Germany and few other marked some company name and i'm nor sure if it take the 10mm collets .the set I have now is 15mm or there about.
the serial on this lathe stamped on the end of the bed is BMR 7925 , the headstock do have some kind of serial numbers as well and the underneath is stamped 1941 and date of course.
like you i compare some Lorch lathe to my and I think I now know for sure mine is Lorch but what model ? I don't know .
regards
Peter_DSC6876.JPG_DSC6877.JPG_DSC6878.JPG_DSC6879.JPG_DSC6880.JPG_DSC6880.JPG_DSC6879.JPG_DSC6878.JPG_DSC6877.JPG_DSC6886.JPG_DSC6877.JPG_DSC6887.JPG
-
21st October 2013, 08:29 PM #8SENIOR MEMBER
- Join Date
- Jun 2012
- Location
- SA
- Posts
- 1,478
Peter, I think the key to what make the lathe is lies in picture dsc6882.
The triangulation in the lathe bed is quite distinctive (and unusual).
I don't see anything like this on the Lorch web pages at Tony's site.
Find the maker using that bed triangulation and you will have your answer.
RobThe worst that can happen is you will fail.
But at least you tried.
-
21st October 2013, 09:10 PM #9SENIOR MEMBER
- Join Date
- Aug 2011
- Location
- victoria
- Posts
- 524
-
24th October 2013, 11:40 AM #10Senior Member
- Join Date
- May 2012
- Location
- Melbourne, Victoria
- Posts
- 121
Thanks for posting those photo's Peter. It really looks like a nice machine. What is the centre height and centre to centre distance?
Joe
-
24th October 2013, 02:47 PM #11SENIOR MEMBER
- Join Date
- Aug 2011
- Location
- victoria
- Posts
- 524
-
27th October 2013, 08:44 AM #12Senior Member
- Join Date
- May 2012
- Location
- Melbourne, Victoria
- Posts
- 121
Hi Peter,
Thanks for the info, and the offer. I've sent you a private message.
Joe
Similar Threads
-
Lorch LAS Lathe
By Brobdingnagian in forum METALWORK FORUMReplies: 26Last Post: 17th October 2013, 01:59 PM -
Similar 41
By Dorno in forum CASTING & STABILISATIONReplies: 3Last Post: 6th February 2010, 06:49 AM -
iPod or similar
By MikeT in forum COMPUTERSReplies: 5Last Post: 24th January 2008, 01:31 AM -
Similar Threads
By goat in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 2Last Post: 16th June 2005, 10:00 PM