Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 26
Thread: Layout Fluid
-
3rd January 2008, 09:19 PM #1
Layout Fluid
Hello All,
I am getting organised to make some plane floats and have a metalworking question. Is layout fluid still commonly used or has CNC taken over if not who retails it and what quantities.
I have searched fairly widely but can't find a supplier in Adelaide, but then I'm not sure who I should be asking. Ounce upona time I believe hardware stores stocked it but they look at you blankly when asked.
I guess a wide felt tip marker would be a suitable substitute.
Any advice appreciated.
Cheers Mike
-
3rd January 2008 09:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd January 2008, 09:32 PM #2
I guess an engineering supplies store may have it, but I bought a litre last year online from R S Components
Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
3rd January 2008, 09:38 PM #3
Jeremy,
Thanks didn't think of R S. Wow liquid gold
Mike
-
3rd January 2008, 11:31 PM #4Novice
- Join Date
- Dec 2007
- Location
- Perth
- Posts
- 11
Hi Mike,
I haven't tried this myself, but it's supposed to be useful for marking out on *steel*. Dissolve a little (don't ask me how much, this is real backyard chemistry) in *very* dilute sulphuric acid (diluted battery acid). Paint on cleaned bare steel, and the copper plates out as a thin film that you can easily mark.
Don't ask me where you go from there if you eventually want to get rid of the copper. I'm not a chemist.
For simple work I just use a wide-tip felt pen.
Roger
-
3rd January 2008, 11:33 PM #5
Felt tip marker works satisfactorily. Also useful for blueprinting (to refine mating parts).
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
3rd January 2008, 11:42 PM #6
Blackwoods have it in their catalogue ,made by Dy Mark and comes in a aerosol can .
I don't think it's as good as the stuff we used to mix up .(powder and metho)
I have been looking for some as well ,but also get blank looks when I ask for it, certainly can't get any here in town.
Kev."Outside of a dog a book is man's best friend ,inside a dog it's too dark to read"
Groucho Marx
-
3rd January 2008, 11:49 PM #7Senior Member
- Join Date
- Feb 2007
- Location
- brisbane
- Posts
- 246
Whitelaw Machine Tools, Secam St Mansfield Qld stock and sell marking die.
I bought a litre for $@$20 mid 07.
Whitelaw Engineering and MachineryCheers
Craig
Brisbane
-
4th January 2008, 12:02 AM #8
-
4th January 2008, 12:07 AM #9
we used to call it marking blue. *G* because it was blue. There are two types the one that dries out which is great for putting on a surface you are going to mark out on and the "soft" or "wet" one that doesn't dry and you smear over a surface before testing against a surface plate to see how flat it is.
Beaut stuff if you have a true surface if you want to see for instance how true the sole of a plane is.
StudleyAussie Hardwood Number One
-
4th January 2008, 12:32 AM #10
Thanks everyone,
Yeh Studley many years ago bearing blue sat in my tool box not sure the apprentices have ever used it now.
If a couple of local machine shops can't help me with a small quantity I'll give Whitelaws a try, failing that sweet talk the stationary clerk at work
Cheers Mike
-
4th January 2008, 08:12 AM #11
G'day All.
I use the Dymark layout spray. Deep Blue that is fast drying and doesn't rub off too easily.Hooroo.
Regards, Trevor
Grafton
-
4th January 2008, 09:45 AM #12
Mike
I use Dy-Mark in a spray can.You can call 082319787 in Sth Australia,it is for use on concrete,bitumen,looks like head office is 072712222 in Qld.
Works for me Peter
-
4th January 2008, 11:07 AM #13
Yep "marking blue" , we used to mix our own when I was an apprentice ,the place where I worked bought the powder and we had a five litre flagon that we mixed it in with metho.
It was also used for initiation ceremonies for new apprentices ,until a Mother came to work one day enquireing about her sons blue testicles.
The non drying stuff we called "bearing blue" ,used for marking the high spots on lathe beds when scraping flat. A small amount goes along way ,I still have acouple of tubes in my toolbox.
Kev."Outside of a dog a book is man's best friend ,inside a dog it's too dark to read"
Groucho Marx
-
4th January 2008, 11:32 AM #14
Layout stain
Zeroing in on this stuff thanks to the info here
Thanks, found them they have an office not far from me. Don't have spray in stock but 250ml bottle in various colours for $5.95 that will do me
Mmmm...... brings back memories. Tried the bearing blue (tube) in some meths it's not soluable
Cheers Mike
-
4th January 2008, 11:38 AM #15
you can get bearing blue from Repco or Auto One
Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
Similar Threads
-
The new layout
By zenwood in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 72Last Post: 15th January 2007, 07:39 AM -
Name that layout!
By ryanarcher in forum Woodies Quiz ForumReplies: 54Last Post: 31st May 2005, 10:30 PM -
Workshop Layout
By Jim Grant in forum HAND TOOLS - UNPOWEREDReplies: 23Last Post: 28th February 2005, 12:11 AM -
Cleaning Up Auto Trans Fluid on Driveway
By rodm in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 6Last Post: 30th November 2003, 11:51 PM