Not wanting to use the mill recently without oil on all surfaces which require it, I used my ML& Nito32 as the oil plunger was full and only one I have atm.

Before I get into more work I need to acquire a second oil pump type unit, locate ALL the nipples seems I need to modify the DRO on the X axis to be able to gain access without the need to constantly remove it a note to H&F
I have read the manual not one word of locations of these points however they are noted in the Parts list. Wish they supplied an oil pump unit with the machine trying to find a decent size one to suit all access points not going well.


Read the full thread at metalworkforums.com...