Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Soutbend 9" Model C Lathe
-
17th August 2014, 07:37 PM #1New Member
- Join Date
- Aug 2014
- Location
- Canberra, Australia
- Posts
- 8
Soutbend 9" Model C Lathe
I have just acquired a Southbend 9" Model C lathe and am looking for a few missing bits.
The serial no on the bed is VB367 which I do not seem to be able to reconcile with other web sites. The bed does not have any other marking or lettering other than a brass plaque on the back side with a Machine No SG 26.
Need a manual if any one has one or a pdf of one.
Need a Chart of Threads and Feeds which is missing off the gear cover. I have found a copy but very difficult to read. Would be great to have an orignal to mount on the machine.
Also looking for a new back gear (Left hand end gear) as one there at present is missing a few teeth and has been rebuilt a few times.
Regards
JohnDym
-
17th August 2014 07:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th August 2014, 10:14 PM #2Philomath in training
- Join Date
- Oct 2011
- Location
- Adelaide
- Age
- 59
- Posts
- 3,149
G'day John and welcome along.
The guys in the Hercus forum may be able to help you with the manual and feed chart.
As for the gear there are a couple who make them. I could do that but I'm in Adelaide. Ueee (Ewan) is Canberra based so may be your best bet to make up a replica or help you repair.
Michael
-
18th August 2014, 09:17 AM #3GOLD MEMBER
- Join Date
- Sep 2008
- Location
- texas, queensland
- Posts
- 1,239
g'day john .
dont know if you have seen this site yet but you may want to have a look in here.
http://www.australianmetalworkinghobbyist.com/store/
johno'If the enemy is in range, so are you.'
-
20th August 2014, 11:09 PM #4Senior Member
- Join Date
- Jan 2009
- Location
- perth wa
- Posts
- 112
-
20th August 2014, 11:15 PM #5Senior Member
- Join Date
- Jan 2009
- Location
- perth wa
- Posts
- 112
Charts for 9 inch
If you message me your address I will photo copy the charts that I have and hope these will be of some help David
Similar Threads
-
Need Advice "Record" Woodworking Vise Model 52ED
By Patt Weebel in forum THE WORK BENCHReplies: 11Last Post: 19th November 2012, 05:09 AM -
Model "T" Ford Tanker - Norm Marshall Style
By crowie in forum TOY MAKINGReplies: 8Last Post: 20th July 2012, 10:47 PM -
Model "T" Ford Ute - Norm Marshall Style
By crowie in forum TOY MAKINGReplies: 7Last Post: 14th July 2012, 12:05 AM -
1930 Model "A" Ford tourer
By powderpost in forum SCALE MODELLINGReplies: 8Last Post: 8th December 2008, 02:57 PM