Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
18th August 2010, 12:24 AM #1Novice
- Join Date
- Jan 2009
- Location
- Sydney
- Posts
- 18
Machine shops for small jobs in Sydney
I had a project where I replace the front solid silicone wheels from a wheelchair with pneumatic wheels. I need this as I am shooting a film and this is my way of getting smooth camera shots. The wheelchair is pneumatic but the front wheels are still solid silicone.
So I got pneumatic tires (8-inch) - however I need to replace the yoke with a wider one since the pneumatics are obviously wider than the older tires.
Normal yoke in a U-shape offset slightly to allow the castor action. 3 holes - one for the castor bearing and 2 to fit in the wheel.
Need someone in Sydney so I can take the original yoke to show measurements and explain what I am talking about..
any recommendations for a workshop or a machine shop ??
-
18th August 2010 12:24 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th August 2010, 10:07 AM #2Mechanical Butcher
- Join Date
- Oct 2004
- Location
- Southern Highlands NSW
- Posts
- 920
Sounds like a job for a welder?
Been a few years now, but I used to go to Thorburn's in Gladesville for this sort of thing.
Jordan
-
18th August 2010, 03:23 PM #3Novice
- Join Date
- Jan 2009
- Location
- Sydney
- Posts
- 18
-
18th August 2010, 04:24 PM #4Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
A lot of shops do not want to do one off's and small work.. Around here if you can carry it into the shop they do not want to know about it... And anyway you cannot afford them due to the mining industry...
Similar Threads
-
Small machine shop job
By Legion in forum METALWORK FORUMReplies: 3Last Post: 1st February 2010, 06:49 PM -
router machine services in sydney??
By snoodles in forum WOODWORK - GENERALReplies: 0Last Post: 2nd February 2009, 09:23 AM -
Small job for an electrician between jobs?
By tea lady in forum EMPLOYMENTReplies: 5Last Post: 7th January 2009, 09:04 AM