Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
-
26th April 2014, 05:38 PM #1GOLD MEMBER
- Join Date
- Aug 2011
- Location
- Melbourne
- Posts
- 2,951
Who uses a magnetic chuck on their mill?
Hi all,
Been surfing ebay and a magnetic chuck popped into view. It prompted a question to myself, can you use them for work holding on a mill? There have been occasions where such an item would have been handy when milling very low profile items. I understand that grinding forces generated on a surface grinder would be a fraction of that on a mill but, the question is:
For very light DOC's on an item with a large surface area (clamping area) is it an accepted method of work holding on a mill?
SimonGirl, I don't wanna know about your mild-mannered alter ego or anything like that." I mean, you tell me you're, uh, super-mega-ultra-lightning babe? That's all right with me. I'm good. I'm good.
-
26th April 2014 05:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th April 2014, 05:50 PM #2
Hi Simon,
Run of the mill ( pardon the pun) Mag chucks don't really have sufficient holding force for milling, they are more suited to grinding. You might get away with light cuts?
There are however some that are made especially for milling, but I think they are mostly electro-magnet types rather than permanent magnet types.
Ray
-
26th April 2014, 06:57 PM #3Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
I have tried it, for the lightest of cuts using HSS it works sometimes.... Most of the time it fails..
Light red, the colour of choice for the discerning man.
-
26th April 2014, 07:03 PM #4
Think back to the thread on the sheet metal press brake with electro-magnetic clamping. Another job to add to the list?
Dean
-
26th April 2014, 08:59 PM #5Senior Member
- Join Date
- Apr 2012
- Location
- Melbourne
- Age
- 57
- Posts
- 122
Can work well if your gentle.
Fantastic if they adjustable for tapers.
-
26th April 2014, 09:28 PM #6
I would only attempt it if you could resthe part agains at least one stop fence (strip bolted to edge of magnetic chuck just sticking up above the surface but below the depth of the cut.
Cheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
-
26th April 2014, 09:35 PM #7GOLD MEMBER
- Join Date
- Aug 2011
- Location
- Melbourne
- Posts
- 2,951
I thought I would this response! I was looking for an excuse to buy one and thought it may be an easy way out of making some low profile clamps which I really need to do!
SimonGirl, I don't wanna know about your mild-mannered alter ego or anything like that." I mean, you tell me you're, uh, super-mega-ultra-lightning babe? That's all right with me. I'm good. I'm good.
-
26th April 2014, 09:38 PM #8Philomath in training
- Join Date
- Oct 2011
- Location
- Adelaide
- Age
- 59
- Posts
- 3,149
Simon, if you really want to hold thin parts on a mill, make up a vacuum table.
vacuum.jpg
(Way cooler than low profile clamps)
Michael
-
28th April 2014, 12:00 PM #9GOLD MEMBER
- Join Date
- Aug 2011
- Location
- Melbourne
- Posts
- 2,951
Hi michael. That looks interesting. I may have to do some research on that. Be interested to know if there is a minimum surface area requied to hold a piece down. Also the top would have to be made fairly precisely, as in be parallel to the mill table.
Simon
Sent from my GT-I9195T using TapatalkGirl, I don't wanna know about your mild-mannered alter ego or anything like that." I mean, you tell me you're, uh, super-mega-ultra-lightning babe? That's all right with me. I'm good. I'm good.
-
28th April 2014, 01:35 PM #10Philomath in training
- Join Date
- Oct 2011
- Location
- Adelaide
- Age
- 59
- Posts
- 3,149
Pressure = force/ area.
Therefore force (downward) = pressure (atmospheric - vacuum) x part area.
The bigger surface area on the part the harder it will stick
Michael
Similar Threads
-
Magnetic chuck plans
By steran50 in forum METALWORK FORUMReplies: 0Last Post: 4th March 2013, 09:58 PM -
Magnetic chuck
By morrisman in forum METALWORK FORUMReplies: 2Last Post: 6th October 2012, 09:12 PM -
Magnetic Chuck Rebuild
By CGroves in forum METALWORK FORUMReplies: 21Last Post: 13th June 2012, 06:02 PM -
Magnetic chuck
By bob colles in forum METALWORK FORUMReplies: 12Last Post: 27th May 2011, 07:27 PM -
Magnetic chuck in lathe
By nexusone in forum METALWORK FORUMReplies: 5Last Post: 7th January 2008, 12:00 PM