Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Medieval sword
-
14th January 2014, 12:19 PM #1Senior Member
- Join Date
- Dec 2013
- Location
- Adelaide
- Posts
- 132
Medieval sword
I made this for my son. Using the stock removal method, it turned out very nice.
-
14th January 2014 12:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th January 2014, 02:16 PM #2SENIOR MEMBER
- Join Date
- Dec 2010
- Location
- Melbourne
- Age
- 79
- Posts
- 601
Could I be so bold to ask,What is he going to use it for?
-
14th January 2014, 02:41 PM #3SENIOR MEMBER
- Join Date
- Jun 2011
- Location
- Australia east coast
- Age
- 71
- Posts
- 1,469
It's a very nice piece of work. I congratulate the OP on his craftsmanship.
PDW
-
14th January 2014, 03:19 PM #4Senior Member
- Join Date
- May 2010
- Location
- FIFO to Pilbara
- Posts
- 121
Wireliner,
looks good - care to share some of the essential details for enquiring minds?
such as ...length, thickness, materials
is it hardened and tempered (if steel), or soft?
Is the wrap at the hilt a leather lace, or some other material? how is it secured?
great work - now please take the time to brag about how it was done to help inspire the rest of us (or at least me and the other 2 guys I showed the pictures to)
thanks,
Des
-
14th January 2014, 04:53 PM #5
Cool. Looks good.
[Wowser comment for the day.] Recently spoke to a knife nut (seems to have quite a few) about double edged blades. His response was if its single edged then no probs, but a double ........
All I'm saying here is be careful about the whole show and tell thing to others.www.lockwoodcanvas.com.au
I will never be the person who has everything, not when someone keeps inventing so much cool new stuff to buy.
From an early age my father taught me to wear welding gloves . "Its not to protect your hands son, its to put out the fire when u set yourself alight".
-
14th January 2014, 04:57 PM #6SENIOR MEMBER
- Join Date
- Oct 2011
- Location
- sydney
- Posts
- 880
Hi,
Nice sword. What's the stock removal method? I guess your son isn't too young (I have four and if I made them all swords we'd lose at least one).
Ben
-
14th January 2014, 05:26 PM #7Banned
- Join Date
- Apr 2013
- Location
- adelaide
- Posts
- 295
Stock removal
Stock removal = cutting, grinding, filing, etc to the required shape, rather than beating the daylights out of it using a hammer, forge and anvil to get the required shape - presumably. Nice, realistic job, particularly the blood/suction channels. Glad my old man didn't make my brother and me one - we would have ended up a bleeding mess.
-
14th January 2014, 08:24 PM #8SENIOR MEMBER
- Join Date
- Jan 2004
- Location
- Bellingen
- Posts
- 587
I'm unsure of the double edge thing but I thought they just banned the import and sale of them. Owning them or making them is still legal..... I think . It might be a state by state thing as well.
I met an old timer that swore double edged knives made the best bush craft tools.
I don't have one so I never checked it out.
Nice sword though! That would be one happy lad!
-
15th January 2014, 11:26 AM #9Senior Member
- Join Date
- Dec 2013
- Location
- Adelaide
- Posts
- 132
medieval sword
Just to answer a few questions. The blade is 35" long and was shaped out of 45mm x 6mm spring steel. The steel is incredibly hard so it did take some time to make. I scored the metal and cut the shape out using thin cutting discs. The rest was ground of with the angle grinder to a point where filing took over. The fuller was done with a grinder too. The hilt was wrapped in thin leather which I got from spotlight and held to the wood by material glue. The pommel was welded to the tang before this.
All in all it weighs about 1.5kg which is close to being historically correct for a Bastard sword.
As for the legality of it, I did ask the police and there is no problem with it. It can't be concealed nor is it an "Eastern weapon" e.g.a katana.
And if you wondering, yes, it is very sharp.
Please let me know I you need more information about them.
Steve.
-
15th January 2014, 07:54 PM #10Senior Member
- Join Date
- May 2010
- Location
- FIFO to Pilbara
- Posts
- 121
Thanks Steve,
Most of the stock removal work I've done in the past has still required that I heat treat the blade, so hence the question/s
Once I get my shed built and finished (build first, then shelves, lining, electrical etc) I will be back in the saddle for this kind of work, and a great many other unfinished projects.
Thanks,
Des
-
15th January 2014, 08:46 PM #11Senior Member
- Join Date
- Dec 2013
- Location
- Adelaide
- Posts
- 132
swords
There is hard steel and hard steel!! I use to get my stock from Seeley's spring works in Mt Gambier. Give that stuff a hit with a hammer and it "sings" for a minute! Get your hands on steel like that, with care in stock removal, heat treat isn't required. While grinding the lack of sparks can be weird. Just have lots of high quality discs, you'll need them.
Cheers,
Steve.
-
15th January 2014, 09:07 PM #12
Bit thin for what wireliner made but power hacksaw blades make for a reasonable blade for an everyday use in the shop. Still got mine from the days when I used to work for a rubber joint.
www.lockwoodcanvas.com.au
I will never be the person who has everything, not when someone keeps inventing so much cool new stuff to buy.
From an early age my father taught me to wear welding gloves . "Its not to protect your hands son, its to put out the fire when u set yourself alight".
Similar Threads
-
JJ - medieval falconer
By JJF in forum WOODCARVING AND SCULPTUREReplies: 56Last Post: 11th July 2013, 07:39 PM -
medieval bowl from sherwood forest
By robin wood in forum WOODTURNING - GENERALReplies: 14Last Post: 29th November 2007, 08:07 PM -
medieval Bungee
By Gra in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 4Last Post: 20th February 2007, 01:22 AM -
medieval weapon plans
By vandedol in forum WOODWORK - GENERALReplies: 8Last Post: 2nd August 2003, 11:26 PM -
Gothic & medieval design
By NewYorkCarver in forum WOODWORK - GENERALReplies: 0Last Post: 12th December 2002, 01:41 PM