Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: AL320G question
-
3rd April 2009, 07:31 PM #1Intermediate Member
- Join Date
- Jul 1999
- Location
- St Ives, Sydney,NSW,Australia
- Posts
- 33
AL320G question
I am looking at getting an AL320G primarily due to space considerations and would be interested in any feedback on this particular model. Also the specs indicate that it has a BC of 600mm is this real?
Thanks
Warren
-
3rd April 2009 07:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd April 2009, 10:56 PM #2SENIOR MEMBER
- Join Date
- Sep 2006
- Location
- Australind ,WA
- Age
- 59
- Posts
- 850
If space is a concern, be aware that you need a fair bit of room on the LH side of the machine to open the end cover and change gears.
The distance BC is 600mm. Quite enough for most workshop jobs.
-
4th April 2009, 03:37 PM #3
At a pinch you can get away with about a foot clearance on the LH side to get to the change gears - you don't need to open the door to 90 degrees.
Similar Threads
-
Qctp - al320g
By barkersegg in forum METALWORK FORUMReplies: 13Last Post: 27th August 2008, 03:19 PM -
Dumb question alert:- Salt and pepper question again
By lubbing5cherubs in forum WOODTURNING - GENERALReplies: 12Last Post: 22nd June 2008, 08:44 PM -
I have a question
By SAISAY in forum WOODWORK - GENERALReplies: 16Last Post: 6th April 2008, 01:16 AM -
An ROS question sander question for the box makers here
By molarman in forum BOX MAKINGReplies: 13Last Post: 20th February 2007, 02:07 PM -
Serious Question
By maglite in forum WOODWORK - GENERALReplies: 9Last Post: 26th October 2005, 11:13 PM