Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
1st December 2019, 06:20 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,425
Milling work needed on a piece of PFC
I have this piece of PFC which is destined to be a new bench drill table. It's 150 x 75 x 200 long. What I need is the top milled flat and the sides milled square to the top. Also need a mounting hole counterbored to mount it. Has a 12mm hole which needs a 25mm counterbore. Anyone on Brisbane north side that could do it. Also willing to post elsewhere if needed. Will pay to have this done.
Read the full thread at metalworkforums.com...
-
1st December 2019 06:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
timber yield in finished piece of work
By Bendigo Bob in forum TIMBERReplies: 16Last Post: 18th July 2018, 07:58 AM -
Interesting piece of maching work
By Woodlee in forum METALWORK FORUMReplies: 1Last Post: 19th March 2009, 10:17 AM -
work piece support
By davmar in forum TRITON / GMCReplies: 6Last Post: 27th August 2008, 06:47 AM -
Work piece direction in table.
By hawkinob in forum ROUTING FORUMReplies: 12Last Post: 5th February 2008, 05:32 PM -
Asking for someone to produce a piece of work - acceptable?
By Manaz in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 3Last Post: 7th October 2007, 06:48 PM