Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
26th July 2020, 07:00 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Model Aero Engine Casting Identification.
G'Day All,
I was recently given a box containing six unmachined aero engine castings. Five of which had a set of detailed drawings. The one shown below has no drawings & I cannot identify it.
Can anyone who is into model aero engines/planes, ID this engine. I am pretty sure that it is a two stroke, glow plug engine as the casting has a transfer port in that would be sealed by the cylinder.
Thanks in advance.
Don.
IMG_1117.jpgIMG_1118.jpgIMG_1119.jpgIMG_1120.jpg
Attached Images
- IMG_1118.jpg (245.2 KB)
- IMG_1119.jpg (248.4 KB)
- IMG_1120.jpg (249.0 KB)
- IMG_1117.jpg (247.8 KB)
Read the full thread at metalworkforums.com...
-
26th July 2020 07:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Cast aluminium engine casting hole, brazing rod or spool gun?
By gazza2009au in forum WELDINGReplies: 12Last Post: 31st January 2015, 12:36 PM -
Model Steam Engine 'kit'
By Jim Ferrous in forum METALWORK FORUMReplies: 12Last Post: 27th August 2014, 08:29 PM -
Casting small engine parts
By wgipps in forum METALWORK FORUMReplies: 31Last Post: 1st December 2011, 02:26 PM -
Help with model engine flywheel
By STEAM in forum METALWORK FORUMReplies: 6Last Post: 29th March 2009, 10:10 PM