Thread: Morgan 15a

Any links or pictures?.

Milling/Drilling Machine | Tools & DIY | Gumtree Australia Launceston Area - Mowbray

Apparently it has a 2.2Kw 240v motor (sounds bigger than I'd have expected)
Face mill capacity 63mm
End Mill 13mm
Drill 20mm
Taiwanese

I did find this NZ website. The photo looks similar

The Toolshed

Russ

Are you sure its 2.2kW? 3hp seems like way to much for that machine.

Having said that the H&F machine about the same size claims 2hp.
M121 | HM-32 Mill Drill - Belt Drive | machineryhouse.com.au

You'd need to ask the guy what sort of travel it has. The one in your toolshed link is pretty small at 190x90mm. Looking at the pictures I think its closer to the H&F machine than the toolshed one(size wise, plus micrometer downfeed + it looks to have more speeds and table stops). Maybe its between the two.

Stuart

No I'm not sure about the 2.2kw - but that's what the guy selling it read off the plate. I agree that it sounds a bit beefy.

I 'm not sure that the NZ link is quite the same either. The one for sale has more speeds etc

It was the only hit when I FGI'd it 'tho.

Russ

Ok this looks more like it

http://www.dogpatch.com/bobp/shop/ml_drl.jpg
Bob's Shop Tour

Try googling Rong Fu 20
or maybe 25.

http://images.harborfreight.com/manu...3999/33686.PDF

Hope this helps.

Stuart

thanks for the leads!