Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Morse Taper Slipping
-
19th September 2012, 06:29 PM #1
Morse Taper Slipping
I have a 3/4" drill bit that is MT2 and it slips (spins) sometimes in the MT2 taper in the tailstock of my 9" hercus, it is only this particular drill that does it, would anyone have a fix or remedy for it. The RPM of the headstock is the second slowest with the back gear engaged. The material being drilled is mild steel.
Shane
Still trying to fit a square peg into a round hole.
-
19th September 2012 06:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
19th September 2012, 06:32 PM #2Philomath in training
- Join Date
- Oct 2011
- Location
- Adelaide
- Age
- 59
- Posts
- 3,149
I'd try bluing up either the taper or the socket and see what the contact area is like. It may be that there is some slight damage that is preventing good seating.
Michael
-
19th September 2012, 06:41 PM #3GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 64
- Posts
- 3,566
Put a lathe drive dog on the drill shank,let it rest against the cross slide or tool post,it wont slip in the tailstock.
-
19th September 2012, 07:14 PM #4.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
-
20th September 2012, 07:35 AM #5
Thanks gents for the help.
Shane
Still trying to fit a square peg into a round hole.
-
21st September 2012, 12:50 AM #6GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
You could put it in a split tube and turn it, if it is damaged. Read it in a Model Engineers Workshop recently. He had a drill bit with a No3 morse and a broken tang, and turned it down to a No2 with no tang.
Similar Threads
-
Morse taper problem
By thefixer in forum WOODTURNING - GENERALReplies: 5Last Post: 10th June 2009, 10:12 AM -
Releasing morse taper
By jvdv in forum METALWORK FORUMReplies: 9Last Post: 24th October 2007, 04:01 PM -
Morse Taper Turning
By jvdv in forum METALWORK FORUMReplies: 46Last Post: 13th September 2006, 03:26 PM -
Morse Taper problem
By graemet in forum HAND TOOLS - POWEREDReplies: 26Last Post: 15th June 2006, 09:18 PM -
No morse taper
By esiegel in forum WOODTURNING - GENERALReplies: 13Last Post: 16th June 2004, 11:20 PM