Needs Pictures: 0
Picture(s) thanks: 0
Results 136 to 141 of 141
-
27th April 2014, 02:29 AM #136
Thanks Bob.
A bit of a google and i'm coming up with nothing though. I guess they may be completely outdated.
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
27th April 2014 02:29 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th April 2014, 02:32 AM #137GOLD MEMBER
- Join Date
- May 2003
- Location
- Perth WA
- Posts
- 3,784
Try bootlace connectors - I believe you can get them on a shoestring budget.
Cheers,
Rod
-
27th April 2014, 06:58 AM #138.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
-
27th April 2014, 01:25 PM #139
They are called Bootlace ferrules, or Wire ferrules. And the crimping tool to use is the 4 jaw style.
Don't buy them from the local electrical wholesaler, you'll pay an arm and a leg... get them from digikey or similar http://www.digikey.com.au/product-se...=0&pageSize=25
Or there's always ebay.. if you are on a shoestring... http://www.ebay.com.au/sch/i.html?_t...at=0&_from=R40
Ray
-
27th April 2014, 02:17 PM #140
I have finally ordered a pair of Crimpers. I chose the second pair listed. The first pair was either badly described, or not big enough for what I wanted. Confusing. The third one (set) was from AG Wholesalers and had the descriptions for the jaws mixed up. No surprise here. The last set was too expensive for what I wanted to use in it. This listing also does not mention what the extra dies are for. It only mentions insulated terminals. It says a 6 pc set when it is 7 pcs. It has 4 extra dies and shows 5 extra dies.
Maybe the pair I have ordered will not be want I want? My original problem was that it is hard to determine exactly what you need, just from often poor photos. I would prefer to look at them in person.
DeanLast edited by Oldneweng; 27th April 2014 at 02:25 PM. Reason: Add a bit
-
27th April 2014, 04:02 PM #141.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
I also like to see what I'm buying where tools are involved and even have a fiddle to see what they are really like. Although I admit to doing it a couple of times I don't like trying out the the real thing in a shopfront store and then buying the exact same thing on-line. This of course sucks me in and is probably why I ended up buying the fancy magnetic jaw set. Anyway I have almost forgotten the price
Similar Threads
-
Looking to swap a 2Hp single phase motor for 1.5 or 2Hp 3-phase motor
By jhovel in forum METALWORK FORUMReplies: 7Last Post: 10th March 2014, 07:26 PM -
new old motor
By weisyboy in forum SMALL TIMBER MILLINGReplies: 6Last Post: 21st April 2008, 07:41 PM -
Induction motor vs brush type motor
By Don Nethercott in forum HAND TOOLS - POWEREDReplies: 8Last Post: 27th May 2005, 02:14 PM