Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 16 of 16
Thread: Moving Machines
-
2nd February 2014, 10:28 AM #16
For those who don't know what my lathe looks like here is one I found on the net of the same model:
Also I noticed this image shows the lifting plate
Height of centres 6.1/2" (165MM) Between centres 40" (1016MM) Swing over bed 13" (330MM) Swing over cross slide 8" (203MM) Swing in gap 19" (483MM) Spindle speeds 30-2500 RPM Spindle bore 1.5/8" (28.4MM) Tail Stock NO. 3 MORSE TAPER Quick change gearbox IMPERIAL/METRIC/MOD/DP Gap piece casting 5.3/8" (137MM) Gap in front of face plate 4.1/2" (115MM) Bed type DOUBLE VEE Input 380/420/3/50 AC 5 HP APPROX Pitch of lead screw 4 TPI 3 jaw chuck 8" (203MM) Tool post 4 WAY Dials DUAL Length 6'8" (2.03M) Width 3' (914MM) Height 4' (1.22M) Nett weight approx. 15 CWTS (762 KGS) …..Live a Quiet Life & Work with your Hands
-
2nd February 2014 10:28 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Moving machines.
By 4-6-4 in forum METALWORK FORUMReplies: 8Last Post: 3rd November 2011, 08:21 PM -
Scored a Pallet Jack (Lifting/Moving Machines)
By Bryan in forum METALWORK FORUMReplies: 31Last Post: 16th August 2011, 08:51 AM -
Moving PIC'S
By disco in forum BOAT BUILDING / REPAIRINGReplies: 12Last Post: 12th December 2005, 10:04 PM