Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 24 of 24
Thread: Mower deck rebuild
-
9th December 2013, 08:56 PM #16
-
9th December 2013 08:56 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
10th December 2013, 06:31 AM #17SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Ballarat
- Age
- 65
- Posts
- 2,659
Hi pipeclay,
I was thinking along the lines of the 4140 as well as I wasn't sure if the 1020 would be good enough.
With the stainless, I find it easy to machine which is probably due to doing my apprenticeship in the food industry.
It was my job to rebuild the can closers and the first job was to pull all the shafts out and make new stainless ones.
Do you think the stainless would be good enough for a shaft like this as it has a fair bit of stress in use.
Phil.
ps I don't mind a bit of levity
-
10th December 2013, 07:43 AM #18GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 65
- Posts
- 3,566
I cant see why not,as it is used in prop shafts and torque would be similar or even greater than the mower deck.
If you already have it might as well use it.
-
10th December 2013, 01:39 PM #19SENIOR MEMBER
- Join Date
- Jun 2011
- Location
- Australia east coast
- Age
- 71
- Posts
- 1,469
Any excuse is a good excuse, is why. It's far enough away not to be a problem and there are plenty of others so no point in killing it or chasing it off.
Don't know why people think stainless is difficult to machine, I machine 316 all the time. It is soft WRT 4140 and similar though.
PDW
-
10th December 2013, 02:56 PM #20Cba
- Join Date
- Aug 2007
- Location
- Melbourne
- Age
- 68
- Posts
- 1,417
Phil, I am not sure if stainless is such a good idea in this case. The nice stainless shaft will be in intimate contact with a plain carbon steel blade. Add some grass juce electrolyte between the two, and the nice stainless shaft may corrode, just as if it was iron and possibly even faster.
-
10th December 2013, 03:33 PM #21
-
10th December 2013, 08:11 PM #22
I did wonder considering your dislike of mowing. If he's far away it is no problem. I only worry about them around the house area which includes workshop and implement shed. SWMBO does not like them in the house. She went to the toilet one day and found one in the wash basin. I am against running them over on the road. Rather pointless I think.
Dean
-
10th December 2013, 08:13 PM #23
-
11th December 2013, 06:17 AM #24SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Ballarat
- Age
- 65
- Posts
- 2,659
Great advice guys, a couple of things I didn't think of like stainless prop shafts, they do cop a flogging so should cope with a mower, and also the corrosive effects of that combination.
It's never gunna just be simple, is it.
Oh, and you should know by now Ray that I'm always in a constant state of counselling .
I checked the rest of the mower out and it seems there isn't much metal left that doesn't have a crack in it so the engine will be used to finish off Dads rotary hoe (another job out of the way)
Phil
Similar Threads
-
Merbau Deck with flood Spa-N-deck
By shedman21 in forum FINISHINGReplies: 0Last Post: 16th August 2011, 05:11 PM -
lawn mower
By WoodJunky in forum WOODIES JOKESReplies: 1Last Post: 8th April 2008, 11:17 AM -
finishing merbau deck with floods spa & deck
By joebianca in forum FINISHINGReplies: 1Last Post: 12th September 2007, 09:27 AM -
Which Ride On Mower
By echnidna in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 35Last Post: 4th July 2006, 10:30 PM -
BL@%#**uc^@@$%mower!?!
By cookyboy in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 7Last Post: 13th April 2005, 10:51 PM