Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: which oil
-
17th July 2012, 09:42 AM #1GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
which oil
The repco Power surface grinder I bought has bearings(?) in the ways, similar to this pic
what oil do I use???
-
17th July 2012 09:42 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th July 2012, 11:21 AM #2Senior Member
- Join Date
- Dec 2011
- Location
- South East Queensland, Australia
- Posts
- 354
Hi eskimo,
You probably know or have found that the oil spreader rollers are spring loaded and the reservoir probably needs a good clean out. At least to me from the pic it appears to be an oil spreader roller.
Be interesting if someone has the manual to see what the maker recommended. I would think any brand lightish to the low side of medium slideway oil would be sufficient.
Personally I'd just use an hydraulic oil as there are plenty of hydraulic machines that lube the slideway/s with the hydraulic oil from the system.
Good luck with it all
Cheers.If I'm not right, then I'm wrong, I'll just go bend some more bananas.