Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
Thread: Optical Pyrometer
-
16th September 2013, 10:17 PM #1GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Optical Pyrometer
Its the other Bob's fault this time.
Picked this up today. Meant to be good from 750C to 2900C
Havent powered it up yet as it takes four D cells, which given its age I think is a good thing.
First thing I noticed was that the scale didnt seem to work right, while looking at the manaul I noticed the small adjustemt knob was on the left, mine is on the right. Then it dawned on me that someone a long time ago put it back together wrong. Took about an hour to careful lever off the front and the gasket was stuck to both faces. Now the scale seems to work right Though it could have be a sign of someone "giving up on it"
The optics work and the filliment is still there(though its still anyones guess whether it still works or not)
It doesnt seem to be the best type for molten metals(there is another model with a different emissivity factor)
Anyone know that the fliud filled glass tubes are?
Would a 6VDC supply do the job?(I'm thinking not unless its a very stable 6V)
I'll scan the manual tomorrow if anyone cares.
StuartLast edited by Stustoys; 16th September 2013 at 10:22 PM. Reason: spelling
-
16th September 2013 10:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th September 2013, 10:44 PM #2Senior Member
- Join Date
- Nov 2007
- Location
- Rockhampton
- Posts
- 106
Looks like a standard cell (very accurate voltage source)
Standard_Cell
John
-
16th September 2013, 10:47 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,791
The fluid filled glass thingo looks like some kind of switch - ie only works in one orientation.
It will be interesting to see what self calibration mechanism it uses.
If it has none it could be hundreds of degrees out.
-
16th September 2013, 11:16 PM #4GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
wow looks like they could have been made in the same factory, but there doesnt seem to be anything inside mine.
There is a calibration process, though i THINK its more about adjusting the scale to match the Voltage drop.
If the blub is replaced there is a matched shunt that comes with it.
There is also some other adjustment which I dont understand at all ATM.
I'll scan the intructions tomorrow.
Stuart
-
17th September 2013, 01:18 AM #5Intermediate Member
- Join Date
- Apr 2009
- Location
- Tas
- Age
- 66
- Posts
- 40
Agreed. It's a voltage reference (standard cell) optical pyrometer info1
-
17th September 2013, 01:59 AM #6GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
-
17th September 2013, 11:15 AM #7GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Leeds and Northrup Optical Pyrometer 8621, 8622, 8623
Mines an 8622.
Don't blame me for most of the out of focus blurriness, thats how they came.
Ex Commonwealth of Australia department of supply. Ex GMH centeral Laboratory Fishermen's Bend
Stuart
-
17th September 2013, 01:35 PM #8Philomath in training
- Join Date
- Oct 2011
- Location
- Adelaide
- Age
- 59
- Posts
- 3,149
So according to page 19, you have to be wearing a collar and tie to get an accurate reading?
-
17th September 2013, 01:39 PM #9GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
-
18th September 2013, 11:11 PM #10GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Damn I look good!
-
19th September 2013, 09:07 PM #11
I find this modern idea of removing your jacket just because you enter the workshop/factory floor rather disappointing. It is not very seemly. Some men have even been known to roll up their sleeves. I ask you!
Dean
-
20th September 2013, 10:57 AM #12Member
- Join Date
- Apr 2012
- Location
- Qld
- Posts
- 50
-
20th September 2013, 09:36 PM #13GOLD MEMBER
- Join Date
- Aug 2011
- Location
- Melbourne
- Posts
- 2,951
I'm rather disappointed that he's not wearing a cravat.......
Must be free dress day?
SimonGirl, I don't wanna know about your mild-mannered alter ego or anything like that." I mean, you tell me you're, uh, super-mega-ultra-lightning babe? That's all right with me. I'm good. I'm good.
Similar Threads
-
High temperature measurements using Optical Pyrometer
By BobL in forum METALWORK FORUMReplies: 10Last Post: 2nd May 2013, 05:46 PM -
Optical comparator
By Stustoys in forum METALWORK FORUMReplies: 2Last Post: 26th July 2012, 03:38 PM -
Optical flats.
By SC_RUFCTR in forum METALWORK FORUMReplies: 43Last Post: 17th March 2012, 11:17 PM -
Optical Illusion
By Grunt in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 11Last Post: 2nd April 2007, 10:20 PM -
Optical Illusion
By silentC in forum WOODIES JOKESReplies: 8Last Post: 31st August 2005, 01:38 AM