Thread: Paint Colour for 1942 (serial no vb367) Hercus 9c

Hi

I would not be overly pedantic when it comes to matching colours for these old machines. Back in those days, colour matching was done by eye and there is always some variables due to each of us having slightly different colour perception , some of us are colour blind . Mike

Hello John,

My '58 Hercus is probably* the same colour as yours. I also have a Wattyl Industrial Coatings RAL fan deck. I will take the change gear cover off on Friday and make some comparisons under various light. I will let you know the results.

* probably, because I have 3 green Hercus machines and the green is different on each.

Bob.

I wanted some "Hercus Green", which isn't the same as what you're after now.
I took a sample of a part that had some good original paint on it, to a paint shop where I knew they have helpful and knowledgeable staff.
They matched it by eye, and I bought a 4 litre can for just a few dollars more than a standard colour.
I can't pick any difference, but then I'm one of those colour-blind people.

Jordan

The answer is easy.

Take a part that is the colour you want to match to Bunnings paint section, the sample area only needs to be less than a 5c piece. Something small and flat is best.

They'll run it under the machine and match the colour then mix up the colour in Killrust. It doesn't cost anymore than the standard colours in Killrust paint.

You're not locked into their pre-determined colours.

Heading to Bunnings tomorrow with a gear and will see how I go!