Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 19
Thread: Premo Lathe
-
12th April 2010, 09:48 PM #1Member
- Join Date
- Jan 2008
- Location
- Revesby NSW
- Posts
- 71
Premo Lathe
Does anybody have any info on Premo lathes or any surplus parts?
-
12th April 2010 09:48 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th April 2010, 10:16 PM #2
Not personally but this link may be a start for you Page Title
-
14th April 2010, 04:51 PM #3Senior Member
- Join Date
- Dec 2009
- Location
- Sydney
- Posts
- 275
Hi Garry, A mate and I both have these beaut little lathes. We have accumulated bits of info as both machines are missing stuff. This includes some sketchy history of Brackenbury & Austin, a couple of promotional flyers and adverts. We would greatly appreciate reproducable photos of change gear chart on the outside of the end cover and details of change gears that you have. I had contacted the ever resourceful pipeclay about completing my change gear set, but need to confirm thickness and keyway size. Regards, AndrewOC.
-
14th April 2010, 09:07 PM #4Member
- Join Date
- Jan 2008
- Location
- Revesby NSW
- Posts
- 71
Premo Lathe
Gavin and Andrew many thanks for your replies. The change plate on the outside of the cover is an engraved piece of sky blue traffolyte with white underneath, coming through as a blue and white engraving. Appears as though this was done by someone other that the manufacturer. I am about to do a CAD dwg of this and get the engraving redone on a piece of black anodised aluminium, should stand out OK. The change gears are 1/2" thick with a 1/8" keyway and marked on the casting is the number of teeth and 16DP ( I do not know what pressure angle they are either 141/2 or 20 deg?). I am going to get pipeclay to repair or replace a couple that are missing teeth.The 80/63 idler gear combination are scotch keyed together. I have ordered a manual that Tony Griffiths (from lathes uk.com) has which may have a bit of info. I am missing the screw threading cutting dial and need to replace the drive belt and finish repairs to apron and gearbox. They are a very solid lathe with a massive tailstock. I will take some photos of the change chear charts outside and inside the cover and attempt to post them if not I will send them to your home address.
Many thanks
Garry
-
19th April 2010, 09:19 PM #5Member
- Join Date
- Jan 2008
- Location
- Revesby NSW
- Posts
- 71
Premo Lathe Photos
Having trouble with digital camera at the moment, should be fixed Wednesday????
Could you pls let me now what is on the speed range plate which is on top of the back gear cover. I am missing that plate and also what size is the dual pulley from the motor that drives the speed chane pulley arrangement , I think that I might have a homemade pulley set up?
Thanks Garry
-
19th April 2010, 09:55 PM #6Senior Member
- Join Date
- Dec 2009
- Location
- Sydney
- Posts
- 275
Hi Garry,
spindle speed plate is missing on mine as well and my mates one is buried somewhere in his full garage! So that is 'subject to further investigation'...
The pulley on the motor is 3.5" and 7" diameters.
hope that helps,
Andrew.
-
20th April 2010, 01:11 PM #7Member
- Join Date
- Jan 2008
- Location
- Revesby NSW
- Posts
- 71
Premo Lathe
Andrew,
Many thanks for the info, I will sent you the details of the gear change plates as a excel spread sheet so as you know what gears you are missing. Once I do the cad dwg I will be able to get a few engraved..
Regards
Garry
-
21st April 2010, 10:41 PM #8
I own a Premo Mark III built by Tulloch Ltd. I have attached a photo (hopefully) of of the plate showing threads.
I have also attached a photo of the "selector fork" showing where a previous operator (high school kid) broke a piece off. Maybe someone has one of those in their scrap box.
-
22nd April 2010, 02:07 PM #9Senior Member
- Join Date
- Dec 2009
- Location
- Sydney
- Posts
- 275
Thanks for the pics Makita. The 1950's Premos have a similar chart inside the change gears cover- i'll compare mine when i get home.
The quick change selector is a bit sad! I'm sure if you can patch it up it would be ok- mine has a lot of slop and has to be goaded into postition anyway.
Have you looked at the link (posted above) to Tony Griffiths excellent 'lathes.co.uk' website? Is your lathe the Premo model pictured or like the Veem? Any clues to where the Tulloch that made your lathe was located?
Here is my Premo, usual story- bought cheap, requires work!;
Regards AndrewOC.
-
22nd April 2010, 03:49 PM #10Member
- Join Date
- Jan 2008
- Location
- Revesby NSW
- Posts
- 71
Premo Lathe
Makita,
Do you have any photos of the change gear arrangement that is on a plate on the outside of the cover, the one that I have I think that someone has had engraved. the original should have been photo etched? like the other plates.Tullock were at Rhodes and used to do a lot of work for the railways, long time ago.
Regards
Garry
-
22nd April 2010, 08:06 PM #11
nice lathe Andrew it just occurred to me that the headstock looks like like a southbend heavy 10 got to love these old machines
happy turning
Patrick
-
22nd April 2010, 09:52 PM #12
Andrew
I have attached a picture of my Premo, hard to get to in the corner of the shed. The quick change selector is my biggest problem. Once I figure out how to fix/replace it I will just need to find some gears and the lathe will be as good as new again.
Frank
-
22nd April 2010, 09:57 PM #13
Garry
Mine only has the change gear arrangement on the inside of the cover. I have posted a pic of the lathe and was wondering whether it is covered in the manual you ordered from the UK?
Frank
-
23rd April 2010, 07:27 PM #14Member
- Join Date
- Jan 2008
- Location
- Revesby NSW
- Posts
- 71
Frank,
Have not got the manual as yet???? still waiting.
-
23rd April 2010, 10:28 PM #15
There is a Premo on Ebay the moment .with fairly detailed pictures .
Looks much like yours Andrew
Kev."Outside of a dog a book is man's best friend ,inside a dog it's too dark to read"
Groucho Marx
Similar Threads
-
old Premo machinery
By Aaron r in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 10Last Post: 16th November 2009, 09:50 PM -
Buying a lathe (Old massive Lathe, or New small C6 Lathe)
By Ch4iS in forum METALWORK FORUMReplies: 5Last Post: 25th March 2009, 12:19 PM -
Premo Thicknesser
By Chris Parks in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 1Last Post: 19th October 2008, 03:10 PM -
can anyone place this lathe? (copy lathe?)
By Slow6 in forum WOODTURNING - GENERALReplies: 2Last Post: 19th March 2006, 09:11 PM