Needs Pictures: 0
Picture(s) thanks: 0
Results 106 to 120 of 1571
Thread: Your latest project
-
18th December 2010, 01:09 AM #106Dave J Guest
If you don't mind Stuart I will take you up on that. That way I can see how strong they are and what size to order.
You bring up a good point about the swarf, never thought about it. I use scrap aluminum angle as soft jaws and am sick of picking them up off the floor halfway through a job.
Dave
-
18th December 2010 01:09 AM # ADSGoogle Adsense Advertisement
-
18th December 2010, 09:18 AM #107GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
18th December 2010, 10:44 AM #108GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
On the way Dave.
As an example of how strong these things are I put one on each side of my thumb 16mm apart and they stay there and even at this size they can pinch you.
To get back OT. Hear is a pic of what I made this week.
Stuart
-
21st December 2010, 08:15 AM #109SENIOR MEMBER
- Join Date
- Aug 2008
- Location
- Charlestown NSW
- Age
- 65
- Posts
- 899
Another source for some small but quite strong magnets are from old Computer Hard drives.
bollie7
-
22nd December 2010, 08:44 PM #110
Here is a little thing I made for when I'm boring or threading blind holes. The bit that attach's to the ways I found in a box of junk and wasn't complete. The brass adaptor and thumbscrew I made from a tap stem and spindle (you can see the before and after in the picture). I had to silver solder the spindle into the stem to give me enough meat to work with.
Here is it attached to the lathe.
Cheers.
Vernon.
__________________________________________________
Bite off more than you can chew and then chew like crazy.
-
22nd December 2010, 09:06 PM #111Dave J Guest
Hi Vernon, Great work and thinking.
You remind me of myself with using whats laying around. I think it gives me more satisfaction turning some scrap into a working, usable part.
With the position, do you find it hard to see once something is in the chuck? Because usually they are on the outside of the ways at the front.
Dave
-
22nd December 2010, 09:25 PM #112
Absolutely . My wife thinks I'm weird because if I find a bit of steel, I pick it up and take it home ... you never know when it might come in handy.
Ideally, in front would be better, however the micrometer stop wasn't originally made for my lathe (I don't know what it originally came off) and doesn't even come close to fitting the front (the front way has a completely different profile to the back). So the back will do for the moment - plus I would meed to be turning a pretty big part to complete obscure the dial gauge.Cheers.
Vernon.
__________________________________________________
Bite off more than you can chew and then chew like crazy.
-
24th December 2010, 10:48 PM #113Dave J Guest
Stuart, those pens come up nice. I should start doing them myself that way the wife would want me down the shed instead of complaining I am always down their.lol
Also want to thank you for the magnets and let anybody know who is thinking of buying them, that they are really strong magnets for their size.
Dave
-
25th December 2010, 12:00 AM #114GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Thanks Dave, they cost about $7 each for parts so they dont break the bank. If you used your own wood or plastic for the blank then rest only cost $3 each. Besides I got to spend $25 on polishing pads
Stuart
-
30th December 2010, 08:12 AM #115GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
Version.....Mark IV
got it right this time....well at least until someone tells me I stuffed up .....yet againLast edited by eskimo; 30th December 2010 at 08:13 AM. Reason: spelling
-
30th December 2010, 12:16 PM #116Dave J Guest
Practice makes perfect, nice work Eskimo
Dave
-
30th December 2010, 02:27 PM #117
I've also made something new. This is a little steam engine made from castings and bar stock. The video is a test firing using a little steam boiler.
[ame="http://www.youtube.com/watch?v=nGqzMWjFm38&feature=player_embedded"]YouTube - Mill Engine under Steam[/ame]Terry B
Armidale
The most ineffective workers will be systematically moved to the place where they can do the least damage - management.
--The Dilbert Principle
-
30th December 2010, 02:41 PM #118GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
thats gorgeous Terry..if a steam engine could be gorgeous that is
-
30th December 2010, 04:21 PM #119
Nice work Terry.
Cheers.
Vernon.
__________________________________________________
Bite off more than you can chew and then chew like crazy.
-
1st January 2011, 02:09 PM #120SENIOR MEMBER
- Join Date
- Sep 2006
- Location
- Australind ,WA
- Age
- 58
- Posts
- 849
Similar Threads
-
latest little project
By wayno60 in forum WELDINGReplies: 3Last Post: 12th July 2008, 03:40 PM -
Help with latest project
By woodcutta in forum THE GARDEN SHEDReplies: 6Last Post: 17th February 2008, 05:30 PM -
My Latest Project
By cypher in forum WOODTURNING - GENERALReplies: 7Last Post: 26th June 2006, 05:22 PM -
my latest project
By sedaps in forum WOODWORK PICSReplies: 4Last Post: 12th July 2005, 12:05 PM -
Latest project
By Different in forum WOODWORK PICSReplies: 14Last Post: 12th July 2005, 11:15 AM