Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: pulley removal
-
17th April 2015, 06:42 PM #1Novice
- Join Date
- Apr 2014
- Location
- Perth
- Posts
- 18
pulley removal
hi
how do you remove the pulley from the spindle of a waldown drill i did"nt want to put a puller on it in case i broke the pulley
what is the correct way of doing it,i have obvisouly undone the nut on the spline but arn't sure of the way to go
many thanks steve
-
17th April 2015 06:42 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th April 2015, 10:03 PM #2
Dunno, he says 'helpfully', but one of these blokes on this thread might know. It has pics too.
https://www.woodworkforums.com/f65/waldown-type-8sn-series-iii-rebuild-144610We don't know how lucky we are......
-
17th April 2015, 10:45 PM #3
Carefull check to see if it has a grub screw , and if it dose check to see if there is a second one below the first , to grub screw is often a locking screw,
if your going to use a puller use one that grips close to the shaft and a mild heat on the pulley won't hurtAshore
The trouble with life is there's no background music.
Similar Threads
-
In need of a pulley.
By Maladay16 in forum WOODTURNING - GENERALReplies: 6Last Post: 13th August 2012, 08:48 PM -
Pulley Modification
By Anorak Bob in forum METALWORK FORUMReplies: 14Last Post: 29th January 2011, 07:29 PM -
Pulley sizes vs RPM?????
By OGYT in forum WOODTURNING - GENERALReplies: 19Last Post: 20th November 2008, 12:15 PM -
which pulley moves
By tanii51 in forum BANDSAWSReplies: 16Last Post: 25th June 2006, 05:24 PM -
Wood to use for pulley?
By rotorque in forum TIMBERReplies: 18Last Post: 10th November 2005, 11:04 PM