Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Right QCTP for me?
-
12th November 2008, 07:35 PM #1Member
- Join Date
- Mar 2008
- Location
- Brisbane
- Posts
- 56
Right QCTP for me?
Hi guys,
Looking at this one for the next purchase. Will this fit the H&F AL-60?
http://cgi.ebay.com.au/MINI-QUICK-CH...3286.m20.l1116
Cheers,
Pat
-
12th November 2008 07:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th November 2008, 09:59 PM #2
Says that the hole trough the center is 10mm so if you have a 10mm tool post spigot it would fit ok .
If yours is larger you can bore the center hole out ,if yours is smaller you make a bush to take up the difference between the hole in the tool holder and your tool post spigot.
Kev."Outside of a dog a book is man's best friend ,inside a dog it's too dark to read"
Groucho Marx
-
12th November 2008, 11:51 PM #3Member
- Join Date
- Mar 2008
- Location
- Brisbane
- Posts
- 56
Ahh, thought that might have been the case.
Cheers
Similar Threads
-
QCTP-Quick Change Tool Post for 9x20 Metal Lathe
By Big Shed in forum METALWORK FORUMReplies: 4Last Post: 26th September 2008, 10:14 PM -
Qctp - al320g
By barkersegg in forum METALWORK FORUMReplies: 13Last Post: 27th August 2008, 03:19 PM -
QCTP Tool Holder - the First
By hux in forum METALWORK FORUMReplies: 5Last Post: 12th November 2007, 06:44 PM -
H&f Qctp
By Beerbotboffin in forum METALWORK FORUMReplies: 11Last Post: 7th November 2007, 05:36 PM