Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: QCTP holder storage
-
31st January 2012, 11:33 PM #1
QCTP holder storage
Hi fellas.
I changed the toolpost on my H&F AL320-G to a BXA a little while ago and have been looking at storage options for the tool holders.
There's a couple of sellers on eBay that offer holders that have a corresponding dovetail. They're a bit pricey for what they are (in my opinion anyway) and I was looking for an alternative. I was thinking of simply copying the same idea and making my own. Anyway, I was going through Bunnings looking for ideas when I came across these steel wardrobe rails.
I've mounted the rails, with a piece of 20 x 3 aluminium behind, on an old monitor stand base. This creates a perfect profile to hang the dovetails on. The advantage is they just lift off, but have enough meat over the lip as to not be in danger of falling off.
The base is about 400mm square and as you can see by the photos I should be able to accommodate up to 15 holders on it. All I need to do now is mount it on the wall next to my lathe. Personally I like this way of storing them better than the dovetail idea.
Hope someone finds this useful.
Regards,
Wayne
-
31st January 2012 11:33 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st February 2012, 12:59 AM #2Dave J Guest
Mine are Dickson style, but that is a neat idea for the BXA tool holders. It would also keep the dust off better than the other ones.
Dave
-
1st February 2012, 07:42 AM #3SENIOR MEMBER
- Join Date
- Sep 2006
- Location
- Mallacoota,VIC,Australia
- Age
- 53
- Posts
- 656
HI,
That is a Good Idea. I have a BXA on My AL-960B. I have seen the Dovetail ones on Ebay, but haven't bought any as yet. I just had a thought though perhaps some Magnetic Strips might work ok. The downside to the Magnetic Strips though is they might collect to much swarf.All The Best steran50 Stewart
The shortest way to do many things is to do only one thing at once.
-
1st February 2012, 10:06 AM #4
Hi Stewart,
Apart from the swarf collection problem of magnetic strips I don't think they'd be powerful enough to hold them, particularly the boring bar holder. The risk of dislodging one while removing another would be high as well.
Would make a nice mess of your carbide tips if they hit the floor, not to mention your foot if you're wearing the standard aussie shed safety footwear (a pair of rubber thongs )
Cheers,
Wayne
-
1st February 2012, 10:23 AM #5Senior Member
- Join Date
- Feb 2011
- Location
- Melbourne
- Posts
- 114
-
1st February 2012, 11:26 AM #6Dave J Guest
-
1st February 2012, 11:28 AM #7Dave J Guest
-
1st February 2012, 08:28 PM #8Philomath in training
- Join Date
- Oct 2011
- Location
- Adelaide
- Age
- 59
- Posts
- 3,149
That's a nice bit of lateral thinking Wayne. There was a lathe tooling thread a short time back
https://www.woodworkforums.com/f65/sh...ayouts-135353/
which had a few other ideas too.
Michael
-
1st February 2012, 09:56 PM #9SENIOR MEMBER
- Join Date
- Sep 2006
- Location
- Mallacoota,VIC,Australia
- Age
- 53
- Posts
- 656
All The Best steran50 Stewart
The shortest way to do many things is to do only one thing at once.
Similar Threads
-
QCTP Holder Storage
By Sterob in forum METALWORK FORUMReplies: 9Last Post: 1st August 2010, 12:56 AM -
QCTP for AL-33X
By Sterob in forum METALWORK FORUMReplies: 13Last Post: 22nd June 2010, 12:42 AM -
New QCTP - which one?
By markjaffa in forum METALWORK FORUMReplies: 3Last Post: 16th November 2009, 05:04 AM -
QCTP Tool Holder - the First
By hux in forum METALWORK FORUMReplies: 5Last Post: 12th November 2007, 06:44 PM -
H&f Qctp
By Beerbotboffin in forum METALWORK FORUMReplies: 11Last Post: 7th November 2007, 05:36 PM