Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Best place for reamers?
-
11th November 2014, 08:09 PM #1Member
- Join Date
- Sep 2012
- Location
- Bomaderry NSW
- Posts
- 67
Best place for reamers?
Hi guys.
I am after a set of reamers, adjustable. I need small ones, say from 1/4" to 1/2" or thereabouts. My mate has lent me a set of chinese ones and they seem to be doing the job OK for me in aluminium and also in brass. One day obviously I will have to give them back to him (unless he dies in the meantime, and he is looking ridiculously healthy ) so its obviously good manners to buy my own set.
Best places to source a set? Dont have to be top quality but a medium quality set would be nice.
regards
Old Hutcho
-
11th November 2014 08:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th November 2014, 09:04 PM #2Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
Have you considered for a medium quality someone like LPR toolmakers?
I get mine from CTC tools, but they are cheap like me...Light red, the colour of choice for the discerning man.
-
11th November 2014, 09:20 PM #3SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Ballarat
- Age
- 65
- Posts
- 2,659
Hi old Hutcho,
I bought mine from LPR Tools.
Not super high quality but they are ok.
When used correctly they work well on steel.
Phil
-
11th November 2014, 10:38 PM #4
Aliexpress. 9 reamers in a set covering from 1/4" - 1/2", $38 US including shipping. Probably identical to your mates Chinese set. Just search for "adjustable reamer" and you'll get over 200 hits you can filter through.
-
11th November 2014, 10:47 PM #5.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,794
I have the CTC ones from 6 to 32 mm.
Have used them in mild steel up to 30 mm thick.
I'm mainly using those between 5/8 and 28 mm for fitting pulleys to motor shafts.
Slow but they seem to work well.
-
12th November 2014, 09:19 PM #6
Have you tried Stuart at Toolexchange.com.au ? Last time i looked he had several sets to choose from.
-
13th November 2014, 07:32 PM #7Member
- Join Date
- Sep 2012
- Location
- Bomaderry NSW
- Posts
- 67
Thanks to all the guys who responded. I will sift through some of these places and see what comes up.
regards
Old Hutcho
Similar Threads
-
Reamers 101
By morrisman in forum METALWORK FORUMReplies: 19Last Post: 4th April 2014, 12:51 AM -
Adjustable Reamers
By jack620 in forum METALWORK FORUMReplies: 15Last Post: 9th October 2012, 08:35 PM -
Taper Pin Reamers
By Anorak Bob in forum METALWORK FORUMReplies: 2Last Post: 8th April 2012, 12:46 AM -
reamers
By welder in forum METALWORK FORUMReplies: 12Last Post: 27th October 2011, 10:42 PM -
where to get reamers etc.
By holmsy2000 in forum METALWORK FORUMReplies: 10Last Post: 16th November 2006, 02:23 AM