Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: remake panel
-
27th April 2008, 12:05 PM #1Senior Member
- Join Date
- Jun 2007
- Location
- Vic
- Age
- 48
- Posts
- 200
remake panel
HI gents
I am restoring my rusty Lambretta. The legshield panel is so bad, I dont think I can reuse it.
I am wondering if somewhere or someone can remake this piece?
Thanks,
Jackaroo
-
27th April 2008 12:05 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th April 2008, 04:41 PM #2I am wondering if somewhere or someone can remake this piece?
There is a whole lot of heating and bashing to make something like that.
Try contacting a local car restoration club for contacts, or try your local TAFE. The students may do it as part of their assessment??? If you pay full price to have it made up.... start saving.
-
27th April 2008, 05:57 PM #3
There would be no need to replicate the panel, a good panel beater would be able to make that useable again for a lot less than it would cost to make a new one.
Ask around and see if there is any that do a little work on the side, it's common practice here, so I'd try that.
Please disregard this post if I've got the wrong end of the stick.
RobertCheck my facebook:rhbtimber
-
27th April 2008, 06:52 PM #4Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
Jackaroo.
Have the panel gently sandblasted or bead blasted, then reassess the situation.
Any sections blow away, were buggered anyway.
A good body builder will have the skills to let in new sections using MIG or TIG.
Areas badly rust pitted, but still sound, can easily be filled.
Ken
-
27th April 2008, 07:01 PM #5SENIOR MEMBER
- Join Date
- Feb 2006
- Location
- Melbourne
- Age
- 65
- Posts
- 979
Hi,
It doesn't seem too bad judging by the picture. What about having it sand-blasted and powder coated or in a proper baking oven? Don't they still make them for your model - even overseas?
MH
-
27th April 2008, 07:19 PM #6Member
- Join Date
- Apr 2007
- Location
- Newcastle
- Posts
- 57
Yeah, doesnt look too bad to me, but blasting it will tell the truth.
Have a look around this forum for some ideas - http://www.metalmeet.com/forum/index.php - there are a few aussies on there that can form panels and such, so if it's not salvagable, then they might be worth a try.
-
27th April 2008, 07:31 PM #7Senior Member
- Join Date
- Dec 2006
- Location
- Outer East - Melbourne
- Posts
- 316
I make panels for classic English Sports cars as a job. It is repairable, and it is able to be remade, even in aluminium or stainless. It all takes time and $. If a part is not available, then making it can be assessed by the owner as to value.
For example if a rare 3 only factory prototype vehicle which has only one still around needs a panel that takes 100 hours at $70 p/h to have made, then there is no other option.
Maybe $500 to make that panel properly in steel. Try 'TinWest' in Werribee, he specialises in reproducing parts, and does a lot of motorbike stuff.
-
28th April 2008, 08:33 AM #8Senior Member
- Join Date
- Jun 2007
- Location
- Vic
- Age
- 48
- Posts
- 200
Good morning all,
Thanks everyone, I think I'll send it away for sandblast and see if I can reuse the piece, maybe just the sides I need to replace. Worse comes to worse I'll get it remake somehow.
Jackaroo.
-
28th April 2008, 10:49 AM #9Senior Member
- Join Date
- Jun 2007
- Location
- Vic
- Age
- 48
- Posts
- 200
Does anyone know what is the thickness of car panel? Will 1.2mm be good enough to repair this job? I am not a panel beater by trade but I have done quite a few panel jobs in the past so I might give this one a try after sandblast. I might take a few weekends to complete thought!
Jackaroo.
-
28th April 2008, 07:21 PM #10Senior Member
- Join Date
- Dec 2006
- Location
- Outer East - Melbourne
- Posts
- 316
Car panel on older cars is generally 1.0mm. The thickness of the guard you have may be 1.0 or 1.2mm
-
11th May 2008, 10:07 PM #11Senior Member
- Join Date
- Jun 2007
- Location
- Vic
- Age
- 48
- Posts
- 200
Finally I managed to finish it. I used 1mm metal sheet. I'll send it away for sanblasting.
Cheers,
Jackaroo.
Similar Threads
-
Panel Clamps
By meerkat in forum WOODWORK - GENERALReplies: 16Last Post: 24th August 2009, 08:55 PM -
panel saws
By peres23 in forum WOODWORK - GENERALReplies: 1Last Post: 22nd December 2006, 09:42 PM -
Anyone need a panel saw??
By chipboard in forum HAND TOOLS - POWEREDReplies: 5Last Post: 18th May 2006, 03:35 AM -
Star Wars - Kiwi Remake
By silentC in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 2Last Post: 15th April 2005, 04:02 PM