Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: How to remove chuck
-
27th January 2022, 01:01 AM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,401
How to remove chuck
A friend has sent me a video of an old machine he's bought in the hope I'd know how to remove the chuck. He's bringing a head over for me to look at but before I start pulling it apart I thought someone might have an idea of where to start. It's only got an 8mm chuck & he wants to go bigger.
F K Pollard & Co were the manufacturers & I think this is the setup. Pollard 9dfx drill.jpg
https://video.fsyd7-1.fna.fbcdn.net/...59486701_52866
Attached Images
- Pollard 9dfx drill.jpg (239.4 KB)
Read the full thread at metalworkforums.com...
-
27th January 2022 01:01 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Help. How to remove drill press chuck
By SuperM in forum GENERAL & SMALL MACHINERYReplies: 5Last Post: 13th February 2021, 08:17 AM -
How do you remove the #2Morse Taper Shank From A Jacobs Drill Chuck ?
By RoyG in forum WOODTURNING - GENERALReplies: 5Last Post: 6th April 2016, 09:45 PM -
Jacobs 14N jacobs chuck how remove the morse taper arbor
By woodfast in forum METALWORK FORUMReplies: 7Last Post: 28th July 2013, 02:53 PM -
how to remove the chuck on a 260g
By welder in forum THE HERCUS AREAReplies: 4Last Post: 25th July 2011, 10:41 AM