Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 22
Thread: Rotary table, non std gearing
-
25th April 2011, 06:33 PM #1Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
Rotary table, non std gearing
There is a small rotary table for sale at the moment. In the text it says
please Note! the gearing on this Table is non standard so requires indexing plates , or re-gearing
What does this mean, would it be hard to fix?
ROTARY TABLE 130mm/5" horizonal / vertical 56-1 ratio | eBay
Ken
-
25th April 2011 06:33 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th April 2011, 06:39 PM #2Dave J Guest
That guys things always go for high prices
I wouldn't be worth modifying, though it can be used as is for simple dividing.
It's the same as the one I am looking at from H&F's, it's 94 to 1.
Dave
-
25th April 2011, 07:34 PM #3Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
Dave,
The item started off at 99 cents, and the current price is where it is, because of the bidders.
I still want to know about what non standard gearing means.
Ken
-
25th April 2011, 07:39 PM #4Dave J Guest
I know it's the bidders, (unless there is something going on) But everyone seems to bid his gear up for some reason.
Non standard gearing is something that is hard to divide into smaller numbers easily and there are no plates around for them unless they are custom made.
Dave
-
25th April 2011, 07:46 PM #5Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
Thanks Dave.
Are you suggesting I leave well alone, or would it be a bargain for around $100?
I reckon I could knock up some plates.
Edit: Oops, the price has suddenly jumped, maybe I should have kept my big mouth shut
Ken
-
25th April 2011, 08:04 PM #6Dave J Guest
Thats what I mean about his prices, I know he has a shop and goes to trade fairs but he must have a big customer following. I have watched some of his gear through last year and it has always gone above what I would pay, and some gear I could buy elsewhere for less than the final price.
For a first table I would stick to something with common gearing, I even see guys getting stuck and asking questions about dividing numbers on those, without throwing in the hassle of odd numbers.
I think it was Merv on another site, that had a program he created to make it easier. I could track it down when your ready.
Dave
-
25th April 2011, 08:22 PM #7GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 65
- Posts
- 3,566
Ken were you planing on making a template for the dividing plates,or some other means of indexing for the holes.
-
25th April 2011, 08:52 PM #8Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
Pipeclay,
I would probably use Autocad, make a dxf file, and have the dividing plates laser cut.
To be honest, I hadn't given it much thought.
Why do you ask?
Ken
-
25th April 2011, 09:45 PM #9Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
It's gone. The winning bid was $153.75. Anyone here buy it?
Ken
-
25th April 2011, 09:49 PM #10GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 65
- Posts
- 3,566
Just curious Ken,fair bit of work in making them on a manual machine,took me about 24 hrs to make 4 hercus plates.
Dont think the laser would be any good on the Holes,how accurate would they be.
-
25th April 2011, 09:58 PM #11Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
Hi Pipeclay,
You are probably right, perhaps get the holes CNC'ed to a dxf file.
I'll worry about it if and when the time ever comes.
Ken
-
25th April 2011, 10:12 PM #12Dave J Guest
Something you should look into before buying an odd gearing table. You will probably find out it's not worth the trouble/ time and money, unless like Pipe Clay you can make it your self. You can buy them for the 6-8 inch tables for around $100-$150 a set.
One way of doing it would be with a DRO with the "Holes in a circle" function. You centre the plate, type in how many holes you want and what PCD and away you go. You only have to push a button for a particular number and move the dials until you zero it for each hole.
This function was great when I was making the sub plate for my rotary table to fit all 3 chucks and the mounting holes.
Dave
-
25th April 2011, 10:56 PM #13Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
Hi Dave,
Your last comments sound interesting. For this dummy, do you have a sketch of your proposal.
"DRO with the Holes in a circle function".???
Ken
-
25th April 2011, 11:21 PM #14GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 65
- Posts
- 3,566
Basically Ken its working off X Y co ordinates.
Can be done manually as well with use of dialindictor/s.
-
25th April 2011, 11:21 PM #15Dave J Guest
You need a digital readout on your mill to do it, and you program in the amount of holes etc.
You can down load the manual from this ebay listing to read the instructions on how to use this function.
SINO 3-axis digital readout (complete DRO kit) | eBay
Dave
Similar Threads
-
Setting up a rotary table
By mav_walrus in forum METALWORK FORUMReplies: 21Last Post: 25th December 2010, 06:59 AM -
Which rotary table??
By xr6t in forum METALWORK FORUMReplies: 20Last Post: 5th March 2010, 09:22 AM -
Which rotary table for your X2 Mill
By Big Shed in forum METALWORK FORUMReplies: 3Last Post: 1st October 2009, 08:39 AM -
Rotary Table
By graemet in forum METALWORK FORUMReplies: 26Last Post: 8th October 2008, 09:34 AM -
Rotary table
By graemet in forum METALWORK FORUMReplies: 0Last Post: 6th April 2008, 09:50 PM