Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
29th October 2008, 11:45 PM #1Intermediate Member
- Join Date
- Oct 2008
- Location
- Perth Australia
- Posts
- 40
Round and squire bar stock wanted
Where do you guys get your bar stock from around the Perth (Mandueah) area? Looking for small 5 - 20mm round and squire bar in small lengths, can anyone advise me?
Thanks dudes
-
29th October 2008 11:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th October 2008, 08:10 AM #2SENIOR MEMBER
- Join Date
- Aug 2008
- Location
- Charlestown NSW
- Age
- 65
- Posts
- 899
Yellow pages is your friend. Look for steel supplies. Now, most steel suppliers will only sell you full lengths, but if you ask nicely they would probably know of someone else who sells cut lengths. Quite often it will be one of their customers.
hope this helps
bollie7
-
30th October 2008, 09:48 AM #3New Member
- Join Date
- Dec 2007
- Location
- perth
- Posts
- 9
Metal Supplier
Try :
Steelmark - 9366200 or Ulrich Noyes Metals 94734700
-
2nd November 2008, 08:27 PM #4
Bohler Uddeholm
8 Beete Street Welshpool
9350 9582
They have all sizes, shapes, grades and materials.
They will cut to length as long as it's over 1/2 inch diameter.
(big saws).
It seems to be cheaper to buy the offcuts and there is a lot of them.
PolorisI've become a tool of my tools.
-
2nd November 2008, 10:04 PM #5Intermediate Member
- Join Date
- Oct 2008
- Location
- Perth Australia
- Posts
- 40
Thanks for that Poloris, I did go there some weeks ago, but the despatch guys seemed to be to busy to help me, it is a very large joint. When you say off cuts, do they allow you to have a look around, or is it closed shop (safety and all)?
That's what I want is small off cuts, what is the best way to approach the guys there?
Thanks again,
Smuttley
Similar Threads
-
Round Top
By Les in Red Deer in forum WOODTURNING - PEN TURNINGReplies: 12Last Post: 17th August 2008, 12:52 PM -
Still a bit out of round
By Matt88s in forum WOODTURNING - PEN TURNINGReplies: 17Last Post: 16th May 2007, 09:24 AM -
In the round
By Frank&Earnest in forum WOODCARVING AND SCULPTUREReplies: 1Last Post: 22nd March 2007, 09:13 AM -
Head Stock & Tail Stock extention plates
By Babytoolman in forum WOODTURNING - GENERALReplies: 0Last Post: 25th December 2005, 11:37 AM