Thread: Will there be another scraping class?

Thank you for organising this Scott and Phil.

For the others, both dates do work for me, however, a September date would work just that little bit better. If anyone would like to swap into the October 4-5 class from the September 13-14 class please let me know.

Thanks,
Joe

Originally Posted by jmebgo

Thank you for organising this Scott and Phil.

For the others, both dates do work for me, however, a September date would work just that little bit better. If anyone would like to swap into the October 4-5 class from the September 13-14 class please let me know.

Thanks,
Joe

Hi Joe,
My preference is weighted towards October 4-5, so if that is OK with the powers that be I am happy to swap.
Cheers,
Bill

Nice work guys.

Work and other commitments are still unclear for me and will be for quite a while (probably won't know until into August), so I'll keep an eye on this thread. If I am able to attend I'll contact when I know.

Obviously I accept that by not being able to commit I'm not guaranteed a place.

WCD and jmebgo: Ive swapped you over on my documents, so its done like miley cyrus' dignity.

(Phil: You dont have a copy of the most up to date document anymore, ill email it when a few more additions come through)

Originally Posted by pippin88

Obviously I accept that by not being able to commit I'm not guaranteed a place.

I can still work with that, your not alone. There's a few with short work commitments.

Originally Posted by scottyd

WCD and jmebgo: Ive swapped you over on my documents..

Thanks Scott.
Cheers,
Bill

Thanks Bill and Scott. Much appreciated.

Joe

Hello,

I am okay for October.

Am fairly flexible timewise so am available for swapping dates or any alternate dates if it makes things easier for others.

Won't be able to get on the internet very much until after 12 July so please excuse me if I don't respond much until then.

Regards

Bill

any one in SA willing to share the drive with me for Oct weekend if we can get a place in the class and providing I can get approval.?

Go over friday and come back monday.

???

Date suits me fine

Originally Posted by steamingbill

Hello,

I am okay for October.

Am fairly flexible timewise so am available for swapping dates or any alternate dates if it makes things easier for others.

Won't be able to get on the internet very much until after 12 July so please excuse me if I don't respond much until then.

Regards

Bill

Would you like me to do all future communication via email with you, so you dont miss anything important? I do need your details too (see back a page) when youve got a few minutes free.

Thank you for organizing the spreadsheet.
I am fine for Sept.


Regards



Mark

Gday Mark, I need some information from you - see my post on the previous page for the details.

Originally Posted by vwcamper74

Thank you for organizing the spreadsheet.
I am fine for Sept.


Regards



Mark

Originally Posted by eskimo

any one in SA willing to share the drive with me for Oct weekend if we can get a place in the class and providing I can get approval.?

Go over friday and come back monday.

???

Happy to fit you in, both weekends currently sit at 12 each. We had 13 for the first class. Still waiting on a few more to fill in details, but I dont see any S.A / Adelaide guys in that second weekend Oct 4 & 5. Lots from Perth.

Have you checked into airfare's? I'm 20 minutes from the airport, about a $35 cab fare. Even on the Saturday Morning, there's a $86 Jetstar with baggage, 6.10 depart / 8.00am arrive You would miss the first 1 1/2 hours.

Qantas are showing 3 flights at $109 on Friday arvo. 4.55, 5.25 & 7.45.

Getting home, even on Sunday night they are showing Qantas @ $140 6.00 & 7:10 pm departs.

(For the others).This is the post Scott referred too. https://www.woodworkforums.com/showth...38#post1775738

We need to finalised our working copy of the spread sheet. We need to know where to find you. I've ordered the cast iron. Requests for deposits will probably go out this weekend, to cover that.

Regards Phil.