Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
-
9th July 2014, 02:58 PM #16
Hi Joe, That is what i meant by "there is so many things i'd rather not move". I could have done it but who knows what i would have wiped out in the process....
Anyway i finished the roller with a 3/4"x10 adjustment screw and have bent up the tubes. I had some issues with them twisting, my roller alignment looked fine so i'm not sure what caused it.
The arch is now finished ready for some paint, although the kids think it makes a better climbing frame and i should leave it where it is....
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
9th July 2014 02:58 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
9th July 2014, 08:31 PM #17SENIOR MEMBER
- Join Date
- Jun 2004
- Location
- Kyabram. Vic
- Posts
- 826
That would be right. An ex chippy and he has the worst fence in the neighbourhood.
Ken
Similar Threads
-
Conic section
By Brobdingnagian in forum METALWORK FORUMReplies: 6Last Post: 2nd January 2013, 01:08 PM -
What size box section should I use?
By Stiebs in forum METALWORK FORUMReplies: 13Last Post: 17th February 2012, 10:00 PM -
Section Chair
By Jack W Burgess in forum WOODCARVING AND SCULPTUREReplies: 3Last Post: 22nd December 2011, 05:07 AM -
Landscaping section?
By PlatypusGardens in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 3Last Post: 24th October 2011, 08:35 PM -
Should this be in the Reno section?
By Christopha in forum WOODIES JOKESReplies: 0Last Post: 4th May 2006, 10:47 AM