Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
-
1st December 2014, 08:51 PM #1New Member
- Join Date
- Jun 2014
- Location
- sydney
- Posts
- 8
Seeking information for a KIRLOSKAR ENTERPRISE 10 metal lathe
I purchased this lathe a while ago and after a manual to service / work out the thread cutting speeds etc. I hope some one can help, this lathe was built in the late 80's in India.
Last edited by 02howdy; 2nd December 2014 at 07:13 PM. Reason: miss spelling
-
1st December 2014 08:51 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd December 2014, 12:25 AM #2Senior Member
- Join Date
- Oct 2008
- Location
- Cairns, Q
- Posts
- 351
This any help?
https://www.woodworkforums.com/showth...irloskar+Lathe
Frank.
-
2nd December 2014, 08:55 AM #3SENIOR MEMBER
- Join Date
- Apr 2008
- Location
- Canberra
- Posts
- 816
Hi Howdy,
I used to own one of these.Good little machine.There is a bunch of information about yourlathe, including the manual, on this thread:
https://www.woodworkforums.com/showthread.php?t=109354&highlight=kirloskar
When did you pick it up? Did you get it out of Canberra?
Brendan
-
2nd December 2014, 08:01 PM #4New Member
- Join Date
- Jun 2014
- Location
- sydney
- Posts
- 8
Hi Brendan
Thanks for the information, there I thought I would have no chance of finding a manual - fantastic. I purchased the lathe on Ebay about a year ago from someone in Sydney. I had been looking for a while and this was the most robust lathe I thought available for my budget and quality. It is three phase, which I'm going to convert to single phase. I'm still looking or I should say my father is, as I have loaned it to him to set it up and hopefully locate a single phase motor, unless you know where a motor can be sourced? I live in Sydney and my Dad lives near Gympie (Qld).
Why did you sell your lathe, what problems if any did you have with yours?
Ashley
-
3rd December 2014, 02:55 PM #5SENIOR MEMBER
- Join Date
- Apr 2008
- Location
- Canberra
- Posts
- 816
Problem with mine was it got stuck by lightning and fried all the circuitry. Insurance company gave me a new one and I gave my one to a mate. Otherwise I would still have it.. they are a robust machine for their size. ..good weight and heaps of thread cutting options through the quick change gear box. I'd leave it three phase if I were you. Buy a small vfd and run it off that. Less stuffing around and you can use vfd for speed control and reversing I think...super handy for thread cutting.
it's a fluke I saw your post. I haven't been on this forum for about a year and as soon as I logged on I saw your thread.
-
3rd December 2014, 07:09 PM #6
It's funny how this thread has come up. There is one of these for sale in Canberra right now. Seller is also selling me my new lathe.....he just doesn't know it yet!
1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
4th December 2014, 08:30 AM #7New Member
- Join Date
- Jun 2014
- Location
- sydney
- Posts
- 8
Just interested what price were they wanting form the Enterprise 10?
-
6th December 2014, 09:56 AM #8
Howdy Howdy, (sorry couldn't resist)
The lathe was on ebay, finishing Monday, but the seller has pulled every single listing he had. About 30 in all, from the 2 lathes (including the VDF i was keen on) cold cut (A startrite like in Techo's thread, hows that for coincidence) bandsaw, big drill, Vicky U2 mill, air compressor, press brake etc.
I went and had a look on Wednesday, the Kiloskar looked like a pretty decent machine, dwarfed of coarse by the 500x1500 3T German beauty in the room.
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
8th December 2014, 09:03 AM #9SENIOR MEMBER
- Join Date
- Apr 2008
- Location
- Canberra
- Posts
- 816
That's interesting Ewan (and potentially a blessing for my wallet). do you think he got cold feet on the sale or as someone come in via ebay and bought everything as a job lot?
I didn't think you could pull an auction once a bid had been placed?
-
8th December 2014, 10:38 AM #10Intermediate Member
- Join Date
- Aug 2014
- Location
- North Queensland
- Posts
- 42
Re Removing eBay listings after bids on item
Over recent years I have had a few items removed on which I placed bids.
Ebay usually puts up a message to the effect: "seller removed the item because it was no longer available", possibly not exact wording.
So it appears a seller can remove a listing anytime before the end time whether or not it had bids.
This info is probably available in eBay's seller's information but I haven't looked recently.
Regards
-
9th December 2014, 10:18 AM #11
Every listing had "Seller has removed this item as there was an error in the listing" or somesuch.
I thought you could only remove one a year or they would charge you the ebay fee for the bid amount at the time you cancelled it.
The funny thing is, now he has cancelled them, i can see that all his items had BIN prices, and some of the items had bids on them higher than the BIN prices. I thought the U2 was a good buy at $1500 (not a bargain but a fair price).
I don't know what the Kiloskar's BIN was as i wasn't watching it. The VDF 48L he wanted 9.5k for, thats a price that would make a dealer jealous IMO.
As he said to me, i like my machines, but i also like money......
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
Similar Threads
-
Seeking information on Progress CTV-700 Milling Machine
By loc243 in forum METALWORK FORUMReplies: 3Last Post: 25th July 2008, 06:52 AM -
Seeking artistic or old-fashioned metal worker.
By Woodwould in forum METALWORK FORUMReplies: 2Last Post: 27th June 2008, 11:49 PM -
Sheraton Lathe information?
By Greg Q in forum METALWORK FORUMReplies: 18Last Post: 25th June 2008, 09:36 PM -
Seeking Axe Information
By wilko32 in forum WOODWORK - GENERALReplies: 8Last Post: 16th December 2006, 07:49 AM -
Planit Enterprise BPM Software
By ColinNF in forum WOODWORK - GENERALReplies: 1Last Post: 3rd February 2005, 05:16 PM